Fluke Networks SimpliFiber Pro - Meranie optického výkonu

Prístroj na meranie optického výkonu

Súbežný test oboch vlnových dĺžok jedného portu, výsledky meraní sú uložené v jednom zázname
Meranie vlnových dĺžok: 1490 nm a 1625 nm
CheckActive™ - s touto funkciou sa pri objavení živého vlákna rozoznie tón a zobrazí sa ikona
FindFiber™ Remote ID umožní jednému technikovi rýchlo identifikovať káblové spoje, alebo presmerovanie
Funkcia Min/Max zautomatizuje presné sledovanie okamžitých výkyvov
Vnútorná pamäť s kapacitou 1000 výsledkov
Software LinkWare pre správu výsledkov testov pre analýzu a generovanie profesionálnych reportov
Máte možnosť výberu z rôznych sád: Sada pre kompletnú verifikáciu vlákna FTK1450, Sady pre inšpekciu a verifikáciu multimódového vlákna FTK1300 a FTK1350, Základné verifikačné sady FTK1000-MM a FTK2000-SM.

Detaily
Špecifikácie

CheckActive™
SimpliFiber Pro merač energetických úrovní vysiela počuteľný tón a zobrazuje ikonu pokiaľ je detekované aktívne spojenie, alebo port. Výhodou je rýchle potvrdenie o aktívnosti spojenia, alebo portu. Energetické úrovne sú merané bez nastavovania.

FindFiber™
Identifikuje chyby a overuje polaritu
Jednoduchá identifikácia káblov šetrí čas. Kontrola správneho zapojenia a dokumentácia.

Min/Max
Sleduje a testuje kolísanie energetickej úrovne
Presne zachytáva kolísanie energetickej úrovne a eliminuje nepresné úsudky. Automatické sledovanie umožňuje spätné prehliadanie výsledkov.

Environmental Specifications
Operating Temperature	-10º C to 50º C
Storage Temperature	-20º C to 50º C
Operating Humidity	95% (10º C to 35º C) Non-Condensing 75% (35º C to 40º C) Non-Condensing Uncontrolled <10º C
EMI, RFI, EMC	Standards compliant¹

¹ Conforms to relevant European Union directives; Conforms to relevant Australian standards; Listed by the Canadian Standards Association; Complies with 21CFR.1040.10,11, and EN60825-1, 2:2007 (Class 1, Hazard Level 1)

Optical Power Meter
Detector Type	InGaAs
Calibrated Wavelengths	850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm
Measurement Range	+10 to -52 dBm (850 nm) +10 to -60 dBm (1300, 1310, 1490, 1550, 1625 nm)
Power Measurement Linearity	±0.2 dB (850 nm)¹ ±0.1 dB (1300, 1310, 1490, 1550, 1625 nm)²
Power Measurement Uncertainty³	±0.25 dB
Display Resolution, dB or dBm	0.01 dB
Auto Dual-Wavelength Switching	Yes
Power Display Units	dBm, mW, μW
Auto-Wavelength Detection	Yes
Data Storage	1000 records, multiple wavelengths per record
External Interface	USB, 2.0 full speed
Optical Connector	Removable adapter, SC adapter as default, optional adapters include LC, ST
Display update rate	1 reading per second
Reference	Individually set for each wavelength
FindFiber ID detection	Yes
Power Requirement	2 AA Alkaline batteries
Battery Life⁴	> 50 Hours (typical)
Automatic Power Off	10, 20, 30 or 60 minutes (can be disabled by user)
Low Battery Warning	Yes, low battery icon blinks
Size (L x W x H)	6.4 in x 3.2 in x 1.5 in (16.5 cm x 8.0.cm x 3.9 cm)
Weight	11.5 oz (325 grams)

¹ For 850nm, ±0.2 dB for power from 0 to -45 dBm, ±0.25 dB for power < -45 dBm
² ±0.1dB for power from 0 to -55 dBm, ±0.2 dB for power > 0 dBm and < -55 dBm
³ 23°C ±2°C, power level -20dBm, continuous wave, 62.5/125µm at multi mode wavelengths, 9/125 µm at 1310,1490, 1550 and 1625 nm; add 0.1 dB for 1625 nm,
⁴ For measured power levels 0 dBm or less, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.

Multimode Optical Source
Emitter Type	LED
Central Wavelength	850 nm, 1300 nm
Wavelength Accuracy	850 nm: +30/- 10 nm 1300 nm: +/- 20 nm
Spectral Width (FWHM)	850 nm: 50 nm (typical) 1300 nm: 135 nm (typical)
Minimum Output Power	850/1300 nm: ³ -20 dBm
Power Output Stability¹	±0.1 dB over 8 hours
Auto Dual-Wavelength Switching	Yes. Can be enabled/disabled by user.
Optical Output Connector	Fixed SC
FindFiber Code Generation	Yes. Fixed at ID 1.
Modes	CW, 2 kHz modulated, Auto-wavelength
Power Requirement	2 AA Alkaline batteries.
Battery Life²	40 hrs (typical)
Automatic Power Off	30 minutes (can be disabled by user)
Low Battery Warning	Yes, LED blinks
Size (L x W x H)	5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight	1.8 oz (278 g)

¹ 23° C ± 2° C, after 5 minutes warm-up time
² In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.

Singlemode Optical Source
Emitter Type	FP Laser: dual 1310 nm/1550 nm
Central Wavelength	1310 nm, 1550 nm
Wavelength Accuracy	1310 nm: +/- 20 nm 1550 nm: +/- 30 nm
Spectral Bandwidth (RMS)	1310 nm: 2 nm (maximum) 1550 nm: 3 nm (maximum)
Minimum Output Power	1310/1550 nm: ³ -7 dBm (typical)
Power Output Stability¹	±0.25 dB over 8 hours
Auto Dual-Wavelength Switching	Yes. Can be enabled or disabled by user.
Optical Connector	Fixed SC
Launch Condition	9/125 μm fiber
FindFiber Code Generation	Yes. Fixed at ID 2.
Modes	CW, 2 kHz modulated, Auto-wavelength
Power Requirement	2 AA Alkaline batteries
Battery Life²	30 hrs (typical)
Automatic Power Off	30 minutes (can be enabled or disabled by user)
Low Battery Warning	LED blinks.
Size (L x W x H)	5.6 in x 3.2 in x 1.6 in (14.2 cm x 8.1 cm x 4.1cm)
Weight	9.8 oz (278 grams)

¹ 23° C ± 2° C, after 5 minutes warm-up time
² In auto-wavelength mode, battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.

FindFiber Source Specifications
Emitter Type	Laser
Source Connector	Fixed SC
FindFiber Code Generation	1 through 8. Default is 3.
Power On/Low-battery Indicator	LED
Power Requirement	2 AA Alkaline batteries
Battery Life	> 80 Hours (typical)
Automatic Power Off	30 minutes
Low Battery Warning	LED blinks
Size (L x W x H)	7.1 in x 1.3 in x 1.0 in (17.9 cm x 3.2 cm x 2.5 cm)
Weight	4.4 oz (125 g)
Safety	Meets Class 1 CDRH

Fluke Networks SimpliFiber Pro - Meranie optického výkonu

Kontaktujte nás