| Type | Description | ORDER CODE |
| Handheld multimeters digital - A-series | |
| 4 1/2 digit (12000 digt) TRMS multimeter with frequencimeasurement, Resitancem., continuity test, diodetest | |
| termperaturemeasurement Typ K, analog bargraph, backlighting, 600 V/CAT IV, 1000 V/CAT III | |
| incl. KS17-2, batteries, manual, CD-ROM, DKD-cerificate | |
| METRAHit BASE | MetraHit base, TRMS-ultimeter | M241A |
| DKD certificate | (recalibration) | |
| METRAHit PRO | MetraHit pro, TRMS-multimeter | M242A |
| DKD certificate | (recalibration) | |
| METRAHit TECH | MetraHit X-tra, TRMS-Multimeter, no Interface | M243A |
| DKD certificate | (recalibration) | |
| METRAHit X-TRA | MetraHit X-tra, TRMS-multimeter | M240A |
| DKD certificate | (recalibration) | |
| METRAHit TECH+GH | MetraHit X-tra, TRMS-Multimeter, no Interface, rubber holster | M243E |
| METRAHit PRO Set | HC20, MetraHit pro, WZ12A | M242D |
| METRAHit PRO + GH | MetraHit pro, TRMS-multimeter, GH | M242E |
| METRAHIT E-Series | |
| TRMS-Multimeter, with dB measurement | |
| 4 6/7 digit (60000 counts) TRMS Multimeter, bandwidth up to 50 kHz, 600 V / CAT IV and 1000 V / CAT III | |
| all multimeters with protective rubber holster, KS17-2, batteries, manual, CD-ROM, DKD-certificate, in HC20 | |
| METRAHIT EBASE | current measurement with current sensors with voltage output and selectable transformation factor | M251A |
| DKD certificate | (recalibration) | |
| METRAHIT ESPECIAL | special multimeter without fuse for measurement with current clamps | M252A |
| DKD certificate | (recalibration) | |
| METRAHIT ETECH | as above with capacity measurement, current measurement | M253A |
| DKD certificate | (recalibration) | |
| METRAHIT EXTRA | as above with data storage (8 MBit) and connector for power pack | M250A |
| DKD certificate | (recalibration) | |
| S - series | |
| METRAHit OUTDOOR | as MetraHit X-TRA, waterproof multimeter for field use (IP65) | M240O |
| DKD certificate | (recalibration) | |
| METRAHit 30M | Precision-Digital-Multimeter including lead set KS, battery, GH, DKD-certificate | M230B |
| DKD certificate | (recalibration) | |
| TRMS multimeter with power measurement. digital triple display, 60.000 digts | |
| voltage, current, frequency, resistance, diode, temperatur, power, energie and power quality | |
| METRAHIT ENERGY | datalogger and IR-interface, Incl. DKD-calibration certificate, KS and GH | M249A |
| DKD certificate | (recalibration) | |
| METRAport 40S | 4 3/4-Digital-Multimeter - USB interface, lead set KS 17, carrying strip, batteries, DKD certificate | M234D |
| DKD certificate | (recalibration) | |
| SECULIFE HIT | TRMS multimeter: 4 1/2 (12000 digit), datastorige, incl. GH, KS17-2, batteries, manual, CD-ROM, DKD-certificate | M687A |
| DKD certificate | (recalibration) | |
| Handheld multimeters (digital) | |
| METRAHit 2+ | Digital Multimeter with Analog-Bargraph and temperature measuring, battery, KS, GH, BA, DKD certificate | M205A |
| METRAHit WORLD | alike METRAHit 2+, add. frequency- and capacitymeasurement, IR-interface, IP52 | M206A |
| DKD certificate | (recalibration) | |
| METRAmax 12 | Analog-Digital-Multimeter, lead set KS14, battery, holster | M212A |
| METRAmax12-Set1 | Hardcase incl. METRAax12, KS, WZ12A, HC20 | M212D |
| DKD certificate | (recalibration) METRAmax 12 | |
| Handheld-Multimeters, analog | |
| METRAport 3A | Analog-multimeter (MA 3E), incl. lead set KS 17, carrying strip and battery | M113A |
| factory calibration certificate | | |
| METRAmax2 | Analog-Multimeter with overload protection, zero at left and center (without lead set) | M102A |
| METRAmax3 | Analog-Multimeter with relay protection (without lead set) | M103A |
| factory calibration certificate | | |
| METRAmax 6 | Ohmmeter, analog indication, 50 Ohm ... 1 MOhm; 30 ... 30000 µF | GTM3060000R0001 |
| factory calibration certificate | | |
| METRAHit 1A | Analog-Multimeter ... 5 A/ 500 V CAT II | M100A |
| METRAHit 2A | Analog-Multimeter ... 15 A/ 500 V CAT II | M101A |
| test protocol | | |
| Calibrators | |
| METRAHIT MULTICAL | multimeter /calibrator for voltage, current, resistance, diode check, capacity and temperatur probes | M245A |
| DKD Kalibrierschein | (recalibration) for METRAHIT MULTICAL | |
| METRAHIT CAL | Calibrator for Voltage, Resistance, Current (source/sink) and temperature probes, incl. batteries, KS, DKD-certificate | M244A |
| METRAHIT CAL Pack | Set METRAHIT CAL and METRAHIT X-TRA in HC30, incl. KS, batteries, DKD-certificate | M244B |
| DKD certificate | (recalibration) for METRAHIT CAL | |
| AS-i-Bustester | |
| METRAHit 1 ASi | AS-i-Address- and Testerunit, GH, batteries, Z236A | M235H |
| test protocol | | |
| Akku-Set 1ASi | Akku-Pack (4 pcs.), mainsadapter | Z206B |
| Z231G | modul base for METRAHIT | Z231G |
| Insulation tester | |
| METRAHit ISO | Insulation tester (50,100, 250, 500, 1000V), TRMS-Multimeter, KS, battery, GH, DKD-certificate | M246B |
| METRAHIT ISO AERO | Special edition for avionic maintenance, METRAHIT TRMS-multimeter and insulation tester (10/50/100/250/500 V) | M246M |
| with rubber holster, inkl. power supply adapter NA-XTRA with a wide input range of 90...250 V, warranty 3 years and DKD-calibration certificate | |
| Aero MasterTest Kit I | Avionic Service case (without DMM), 68 parts, special test and measurement accessories for the avionic industries | Z246A |
| Aero MasterTest Kit II | Avionic Service case incl. METRAHIT ISO Aero and special test and measurement accessories (68 parts) for the avionic industries | M246N |
| METRAHit T-COM | multimeter for testing copper kable installation, battery, KS, F836, GH, DKD certificate | M246A |
| METRAHIT T-COM plus | multimeter alike METRAHIT T-COM and insolationtesting 10V and capazitytsmeasurement in a-b-E | M246S |
| DKD certificate | (recalibration) - METRAHit ISO / ISO AERO | |
| DKD certificate | (recalibration) - METRAHit T-COM | |
| DKD certificate | (recalibration) - METRAHit T-COM plus | |
| Resistance measuring instruments | |
| METRAHit 27M | Milliohm- and Multimeter incl. KS17S, GH18 und DKD-certificate | M227A |
| METRAHit 27I | Milliohm- Insulation- and Multimeter incl. NA4/500, NiMH-Accu, KS17S, GH18 und DKD-certificate | M227B |
| METRAHit 27AS | TestKit including data acquisition-system with M227B, Systemsoftware, accessories (for Avionik-Service), DKD certificate | M227C |
| METRAHit 27EX GMC-I | like M227F, but GMC-I brand | M227F |
| METRAHit 27EX AIRBUS | Set consisting of milliohmmeter for potentially explosive atmospheres, including a Kelvin probe, | M227G |
| a Kelvin clip and 4 NiMH storage batteries in a HC 30 hard case, including DKD calibration certificate | |
| Special version for Airbus - ident. No. 97000F92001015000 | |
| DKD certificate | (recalibration) for METRAHit 27M or 27EX | |
| DKD certificate | (recalibration) for METRAHit 27I or 27AS | |
| shunts | | |
| NW3A | shunt 3 A Klasse 0,5 600V CAT IV, 1A/100mV, 0,1 Ohm | Z205B |
| NW300mA | shunt 300 mA Klasse 0,5 1mA/1mV 1 Ohm | Z205C |
| DKD certificate | | |
| Measuring adapters | | |
| PMA16 | Energiemeasuringadapter for METRAHit 29S / with Schuko adapter plug | Z228A |
| SM 16 | Current adapter | GTM9070190E0002 |
| attachments for METRAHit WORLD (and METRAHIT ONE plus) and METRAHIT 30M | | |
| USB-Hit | bidirectional adapter IR/USB for METRAHit | Z216A |
| USB-Pack | Set: USB-Hit, USB-cabel and METRAwin10/METRAHit | Z216B |
| BD232 | bidirectional adapter (without software) | GTZ3242100R0001 |
| BD-Pack 1 | 1-channel pack, incl. BD232, RS232-cable and software METRAwin10/METRAHit | Z215A |
| attachments for A-series, E-series, S-series | | |
| USB X-TRA | bidirectional adapter IR/USB | Z216C |
| charger | | |
| Z206D | NiMH charger (AA) and (AAA) | Z206D |
| mains adapters | | |
| NA X-TRA | NA X-tra mainsadapter AC110V..230V/DC5V | Z218G |
| NA HIT 2x | mains adapter 90 ... 230V/ 5V for MetraHit 27M, 27i | Z218H |
| current sensors AC/DC | | |
| Z13B | clip-on current transformer 60 / 600A DC, 40 / 400 A AC | Z213B |
| CP30 | clip-on-current transformer 0...30 A DC, 0...20 A AC, 100 mV / A DC AC | Z201B |
| CP330 | clip-on-current transformer 0...30 / 300 A DC, 0...20 / 200 A AC, 10 mV / A DC AC // 1 mV / A AC DC | Z202B |
| CP1100 | clip-on-current transformer 0...300 / 1000 A DC, 0...200 A AC, 1 mV / A AC DC | Z203B |
| factory calibration certificate | | |
| METRAFLEX 3000 | Flex current sensor, 30/300/3000 A AC, 100/10/1 mV/A, 1%, 10 Hz ... 20 kHz, sensor length 61 cm, with batteries | Z207E |
| METRAFLEX 3000M | Flex mini current sensor, 30/300/3000 A AC, 100/10/1 mV/A, 1%, 20 Hz ... 100 kHz, sensor length 16 cm, with batteries | Z207J |
| factory calibration certificate | | |
| clip-on currenttransformers | | |
| WZ12B | Clip-on current sensor 10mA...100A~, 1mV/10mA~; 2% | Z219B |
| WZ12C | Clip-on current sensor 1mA...10A~, 1mV/mA~; 1A ...120A~, 1mV/A~ | Z219C |
| WZ11B | Clip-on current sensor ...20/200 A~, switchable output 2V~ | Z208B |
| Z3512A | current sensor 0...1/100/1000 A~ AV~ (0,7%...0,2%) | Z225A |
| factory calibration certificate | | |
| currenttransformers | | |
| WZ12A | Clip-on current transformer 15...180A~, 1mA/A~, 1000:1, 3% | Z219A |
| WZ12D | Clip-on current transformer 30mA...150A, 1000:1, 2,5% | Z219D |
| WZ11A | Clip-on current transformer 11...200 A~ | Z208A |
| Z3511 | Clip-on current transformer 4...500A~, 1mA/A~ | GTZ3511000R0001 |
| Z3512 | Clip-on current transformer 0,5...1000A~, 1mA/A~ | GTZ3512000R0001 |
| Z3514 | Clip-on current transformer 1...2000A~, 1mA/A~ | GTZ3514000R0001 |
| factory calibration certificate | | |
| Temperature probes | | |
| Z3431-3 | Temperature probe with standard immersion sensor, type K (NiCr-Ni), -20...+350 °C | GTZ3431003R0001 |
| Z3431-4 | Temperature probe without (plug in) sensor, for thermocouple type K (NiCr-Ni), -25...+1150 °C | GTZ3431004R0001 |
| Z3431-5 | Standard immersion sensor, plug in, thermocouple type K, up to +1100 °C | GTZ3431005R0001 |
| Z3431-6 | Surface sensor, plug in, thermocouple type K, up to +850 °C | GTZ3431006R0001 |
| Z3431-7 | High temperature plug in sensor tape, thermocouple type K, up to +450 °C | GTZ3431007R0001 |
| Z3431-8 | Flexible, insulated plug in sensor, thermocouple type K, up to +250 °C | GTZ3431008R0001 |
| Z3431-9 | Temperature probe without (plug in) sensor, for thermocouple type K (NiCr-Ni), -20...+350 °C | GTZ3431009R0001 |
| factory calibration certificate | | |
| DKD certificate | | |
| Temperature sensors Pt100/Pt1000 / K-type | | |
| Z3409 | Temperature sensor Pt100 for surface- and immersion measurements, -40...+600 °C | GTZ3409000R0001 |
| TF220 | Temperature sensor Pt1000 for gas and liquid measurements, -50...+220 °C | Z102A |
| TF550 | Oven sensor Pt1000, -50...550 °C | GTZ3408000R0001 |
| TF400CAR | Pipe-oil-temperatureprobe, Pt1000, Kl. B, 50°C...500°C, 3 x 810 mm | Z102C |
| TF400 SURFACE | surface temperaturesensor, (T90 = 2 s), thermocouple type K, -50 ...+400 °C | Z102E |
| TS-Chipset | 10 Temperature sensors Pt 100 (2mm x 2,3 mm), adhesive, -50... + 550 °C) | GTZ3406000R0001 |
| factory calibration certificate | | |
| DKD certificate | | |
| High-frequency probe | | |
| Z3431-2 | High-frequency probe 100kHz...750MHz, 0,25...50V~ | GTZ3431002R0001 |
| factory calibration certificate | | |
| Measuring accessories | | |
| KS 17-ONE | Leadset, 1.2 m, 600 V CAT III 16 A | Z110K |
| KS 17-2 | Lead set, 1.2 m, 1000 V CAT III, 600 V CAT IV 16 A | GTY3620034P0002 |
| KS17S | Leadset with 2mm - probes, l = 120 cm, 1000 V/CAT III | Z110H |
| KS-NTS | Leadset incl. probes, clips and USA-probes, 1000 V/CAT III, 600 V/CAT IV 20 A | Z110W |
| KS21T | Leadset for telekommunikation for METRAHIT T-COM, 600 V CAT III 16A | Z110U |
| KS29 | lead set for SYSTEM MULTIMETER METRAHIT ENERGY and MetraHit 29S | Z229A |
| KY 94 | Hook shaped clips (1 pair) for KS 17-2 and KS 17-ONE, 300 V CAT III | GTY3610094P01 |
| KY 95-1 | Alligator clips (1 pair) for KS 17-ONE, 600 V CAT III | GTZ3215000R0002 |
| KY 95-2 | Alligator clips (1 pair) for KS 17-2, 1000 V CAT III 19A | Z110J |
| KY 96 | Attachable lugs (1 pair) for KS 17-2 and KS 21, 300 V CAT III | GTY3610096P01 |
| Z3241 | Interface cable RS232C, 2 m, (included in 1-Ch.Pack, 4-Ch.Pack and Z3231) | GTZ3241000R0001 |
| Kelvin Clips | | |
| KC4 | Kelvin Clip | Z227A |
| KC27 | Kelvin probes | Z227B |
| expendable material | | |
| FF(UR)16A/1000V AC/DC | Fuses, 1 pack = 10 each | Z109B |
| FF (UR) 10A/1kV AC/DC | Fuses, 1 pack = 10 each | Z109L |
| FF(UR)1,6A/1000V AC/DC | Fuses, 1 pack = 10 each | Z109C |
| FF(UR)1,6A/700V AC/DC | Fuses, 1 pack = 10 each | Z109E |
| FF(UR)16A/600V AC/DC | Fuses, 1 pack = 10 each | Z109D |
| FF630mA/700V | Fuses, 1 pack = 10 each | Z109J |
| FF6,3A/500V | Fuses, 1 pack = 10 each | Z109K |
| FF1,6A/700V AC | Fuses, 1 pack = 10 each | Z109E |
| FF16A/600V AC/DC | Fuses, 1 pack = 10 each | Z109A |
| FF1A/380V (5 x 20) | Fuses, 1 pack = 10 each | Z109H |
| T16A/500V (6,3 x 32) | Fuses, 1 pack = 10 each | Z109I |
| F500mA/250V | fuses F1/F2 for multimter function of METRAHit 28C | Z109F |
| M125mA/250V | fuses F3 for calibratorfunction of METRAHit 28C and 28c light | Z109G |
| FF0,63A/400V | Fuses, 1 pack = 10 each | Z109M |
| software | | |
| METRAwin 90-2 | Calibrator software | Z211A |
| Update 90-2 | Update for METRAWin 90-2 | Z211E |
| METRAWin 90-F | Calibratorsoftware for F5500A / F5520A | Z211C |
| METRAWin 90-FJ | Calibrator- and adjustment software | Z211F |
| Z3240 | METRAwin 10 - software and update | GTZ3240000R0001 |
| cases and bags | |
| HitBag | Cordura belt bag for multimeter type METRAHit and METRAport | Z115A |
| F809 | Ever-ready case | GTY3172083P01 |
| F822 | Carrying bag | GTY3172095P01 |
| F823 | Ever-ready case with cable compartment | GTY3172097P01 |
| F825 | Ever-ready case | GTY3172100P01 |
| F829 | Carrying bag | GTZ3301000R0003 |
| F836 | Ever-ready case | GTZ3302000R0001 |
| F840 | Ever-ready case for 2 x MetraHit S, 2 x SI232 and accessories | GTZ3302001R0001 |
| F841 | Carrying bag | Z104A |
| GH X-TRA | Rubber holster and carrying strip | Z104C |
| GH18 | Rubber holster and carrying strip | GTZ3212000R0001 |
| GH185 | Rubber holster | GTY3171185P01 |
| GH19 | Rubber holster | Z104B |
| HC20 | case for METRAHit (1pc.) | Z113A |
| HC30 | case for METRAHit (2pcs.) | Z113B |
| Calibrators | | |
| F5500A | Multi-funktion-Calibrator | M292F |
| F5520A | High performance Multi-funktion-Calibrator | M292G |
| CS92A5500 | Calibration system (F5500A, BD232, RS232G-cable, METRAwin 90-F) | M292A |
| CS92B5500 | Calibration system (F5500A/SC300, Sope option 300MHz, BD232, RS232G-cable, METRAWin 90-F) | M292B |
| CS92C5500 | Calibration system CS92C:F5500A/SC600V, Scope option 600 MHz, BD232,RS232G-cable METRAwin90-F | M292C |
| CS92E5520 | Calibration system CS92E: F5520A, BD232, RS232G-cable METRAwin90-F | M292E |
| Coil 5500A | Coile for AC-current-calibrators (.... 1000 A) | Z292C |
| Power Measurement | |
| Power meters | |
| MAVOWATT 4 | Multi-function power meter; 0,25/1/5/25 A; 50/100/250/500 V | GTM3033000R0001 |
| factory calibration certificate | | |
| energie- and poweranalyser MAVOWATT 20 | |
| energie- and poweranalyzer incl. measuring leads, battery, battery charger, 4 GB CF flash card, factory calibration certificate, energy platform report writer software and carrying case | | |
| MAVOWATT 20 Set 1 | MAVOWATT 20 incl. accessories s.a., and 4 current clamps TR2500A (10...500A) | M817Q |
| MAVOWATT 20 Set 2 | MAVOWATT 20 incl. accessories s.a., and 4 current clamps TR2510A (1...10A) | M817R |
| MAVOWATT 20 Set 3 | MAVOWATT 20 incl. accessories s.a., and flex current sensors | M817S |
| MAVOWATT 20 Set 4 | MAVOWATT 20 incl. accessories s.a., and 4 current clamps TR2550A (1...100A) | M817T |
| MAVOWATT 20 Set 5 | MAVOWATT 20 incl. accessories alike set 3, and PR150/SP1, 150 A, batterieoperated 9 V | M817U |
| MAVOWATT 20 Set 6 | MAVOWATT 20 incl. accessories alike set 3, and PR150/SP8, 1500 A, batterieoperated 9 V | M817V |
| DKD-Calibration Certificate | (recalibration) MAVOWATT 20 | |
| Power quality analyzer | |
| MAVOLOG 20P | Power Quality Analyzer for one- and threephase measurements acc. EN 50160 | M831A |
| Z864D | accessoriy set | Z864D |
| Z864E | NH-safety handle | Z864E |
| Z864F | programming kit | Z864F |
| Energie- and Power disturbance analyser | |
| enrgie- and power disturbance analyzer incl. measuring leads, battery, batterycharger, 4 GB CF flash card, factory calibration certificate | | |
| MAVOWATT 30 | enrgie- and power disturbance analyzer and accessories s.a. | only available as set |
| Mavowatt 30 Set 1 | set 1 each incl. 3 current clamps TR2500A (10-500A), Dranview 6 Pro software, carrying case | M817E |
| Mavowatt 30 Set 2 | set 2 incl. 3 current clamps TR2510A (1-10A), Dranview 6 Pro Software, carrying case | M817I |
| Mavowatt 30 Set 3 | set 3 incl. 4 flex. current sensors DRANFLEX, mains adapter RR/PS/4PEU, Dranview 6 Pro software, carrying case | M817M |
| MAVOWATT 40 | enrgie- and power disturbance analyzer and accessories s.a. | M817B |
| Mavowatt 40 Set 1 | set 1 each incl. 3 current clamps TR2500A (10-500A), Dranview 6 Pro software, carrying case | M817F |
| Mavowatt 40 Set 2 | set 2 incl. 3 current clamps TR2510A (1-10A), Dranview 6 Pro Software, carrying case | M817J |
| Mavowatt 40 Set 3 | set 3 incl. 4 flex. current sensors DRANFLEX, mains adapter RR/PS/4PEU, Dranview 6 Pro software, carrying case | M817N |
| MAVOWATT 70 | enrgie- and power disturbance analyzer and accessories s.a. | M817C |
| Mavowatt 70 Set 1 | set 1 each incl. 3 current clamps TR2500A (10-500A), Dranview 6 Pro software, carrying case | M817G |
| Mavowatt 70 Set 2 | set 2 incl. 3 current clamps TR2510A (1-10A), Dranview 6 Pro Software, carrying case | M817K |
| Mavowatt 70 Set 3 | set 3 incl. 4 flex. current sensors DRANFLEX, mains adapter RR/PS/4PEU, Dranview 6 Pro software, carrying case | M817O |
| MAVOWATT 70-400 | enrgie- and power disturbance analyzer and accessories s.a. | M817D |
| Mavowatt 70-400 Set 1 | set 1 each incl. 3 current clamps TR2500A (10-500A), Dranview 6 Pro software, carrying case | M817H |
| Mavowatt 70-400 Set 2 | set 2 incl. 3 current clamps TR2510A (1-10A), Dranview 6 Pro Software, carrying case | M817L |
| Mavowatt 70-400 Set 3 | set 3 incl. 4 flex. current sensors DRANFLEX, mains adapter RR/PS/4PEU, Dranview 6 Pro software, carrying case | M817P |
| MAVOWATT 50 | Energie- and power disturbance analyser, 3-phase up to 400 Hz, 8 galvanic separated channels, mains cable | M816A |
| network cable, in convenient case | |
| DKD-Calibration Certificate | (recalibration) MAVOWATT 30 / 40 / 50 / 70 | |
| accessories | MAVOWATT 20, 30, 40,70 | |
| TR-2510A | 1-10Arms, 40Hz-5kHz, max. diameter 15mm | Z817A |
| TR-2500A | 10-500Arms, 40Hz-5kHz, max. diameter 50 mm | Z817B |
| TR-2520A | 100-3000Arms, 40Hz- 5kHz, max diameter 72 mm | Z817C |
| TR-2021 | 1- 30A RMS, 48Hz-10kHz, max. diameter 20mm | Z817D |
| TR-2019B | 50 - 300A RMS, 30Hz-5kHz, max. diameter 52mm | Z817E |
| TR-2022 | 10-1000A RMS, 30Hz-5kHz, max. diameter 54mm | Z817F |
| TR-2023 | 200-3000A RMS, 30Hz-5kHz, max.diameter 65mm | Z817G |
| TR-2501A | 100mA-1,2Arms, 40Hz-5kHz, max. diameter 15 mm | Z817Y |
| TR-2530A | 20-300Arms, 30Hz-5kHz, max. diameter 54 mm | |
| TR-2540A | 10-1000Arms, 30Hz-5kHz, max. diameter 54 mm | |
| TR-2550A | 1-100Arms, 40Hz-10kHz, max. diameter 15 mm | Z817U |
| PR150/SP2 | 150 A, battery operation 9V | Z817N |
| PR1500/SP8 | 1500A, battery operation 9V | Z817O |
| PR150/SP1 | 150A, operated by opt. mains adapter (incl. in scope of supply) | Z817P |
| PR1500/SP7 | 1500A, operated by opt. mains adapter (incl. in scope of supply) | Z817Q |
| COMM-RS232 | RS232 adapter incl. NodeLink software | Z818A |
| COMM-OEA | Ethernet adapter incl. NodeLink software | Z818B |
| COMM-OUA | USB adapter, incl. NodeLink software | Z818C |
| CFDATA-DB | CF flash card > 4GB | Z818F |
| BP-PX5 | Akku Pack | Z818G |
| SCC-4300 | carrying bag | Z818H |
| adapter 4mm | adapter cable for 4mm plugs | Z817T |
| CA4300 | adapter cable for TR-20xx) | Z817H |
| DRANFLEX 3000XL/24 | 30/300/3000A, sensor length 60 cm | Z817V |
| DRANFLEX 3000XL/36 | 30/300/3000A, sensor length 90 cm | Z817W |
| DRANFLEX 3000XL/48 | 30/300/3000A, sensor length 120 cm | Z817X |
| DRANFLEX 6000XL/24 | 60/600/6000A, sensor length 60 cm | Z816A |
| DRANFLEX 6000XL/36 | 60/600/6000A, sensor length 90 cm | Z816B |
| DRANFLEX 6000XL/48 | 60/600/6000A, sensor length 120 cm | Z816C |
| METRAFLEX 3001XL | 30/300/3000A, sensor length 60 cm, without power supply | Z207H |
| factory calibration certificate | | |
| METRAFLEX 3003XL | 3 phase 30/300/3000A, sensor length 60 cm, without power supply | Z207I |
| factory calibration certificate | | |
| accessories | MAVOWATT 50 | |
| shunts | | |
| Z860A | Shunt 20 mA / 1V (class 0,2) | Z860A |
| Z861A | Shunt 1A / 1V(class 0,2) | Z861A |
| Z862A | Shunt 5A / 250 mV (class 0,2) | Z862A |
| Z863A | Shunt 16A / 160 mV (class 0,2) | Z863A |
| STP 100K SET 3x | Set 3 pcs centre point resistances 100 kOhm (0,2%) with low-pass filter f 3dB - 900 kHz | Z865B |
| current clamp sensors | | |
| Z821B | Clip-on current/voltage transformer, passive, 1...3000 A~; 0...1V, frequency range 30Hz...5kHz | Z821B |
| Z3512A | current sensor 0...1/10/100/1000 A DC // 0...1V DC (0,7%...0,2%) | Z225A |
| WZ11B | Clip-on current transformer ...20/200 A~, switch, output 2V~ | Z208B |
| Z13B | Clip-on current transformer 60 / 600A DC, 40 / 400 A AC; 10mV/A, 1mV/A | Z213B |
| CP30 | Clip-on current transformer, 0...30 A DC, 0...20 A~, 100 mV / A, | Z201B |
| CP330 | Clip-on current transformer, 0...30 / 300 A DC, 0...20 / 200 A~, 10 mV / A ; 1mV/A, | Z202B |
| CP1100 | Clip-on current transformer, 0...300 / 1000 A DC, 0...200 / 1000 A~, 1 mV / A | Z203B |
| factory calibration certificate | Z821B, Z3512A, Z13B | |
| factory calibration certificate | WZ11B, Z201A, Z203A | |
| flexible AC current sensors | | |
| METRAFLEX 3001 | Flex AC-current sensor, 30/300/3000 A, 100/10/1 mV/A, 1%, 10 Hz ... 20 kHz, sensor length 61 cm, | Z207F |
| with batteries, with power supply cable for powering by MAVOWATT 50 | |
| METRAFLEX 3003 | 3-phase flex AC-current sensor, 30/300/3000 A, 100/10/1 mV/A, 1%, 10 Hz ... 20 kHz, sensor length 61 cm, | Z207G |
| with batteries, with power supply cable for powering by MAVOWATT 50 | |
| accessories | MAVOWATT 20, 30, 40,70 and 50 | |
| flexible current sensors | | |
| METRAFLEX 3000M | 30/300/3000 A AC, no mains adapter, 1 pair of 4mm plugs | Z207J |
| METRAFLEX 3000M XL | 30/300/3000 A, no mains adapter, 4-pol. Hypertonics-plugs | Z207K |
| factory calibration certificate | | |
| software | | |
| Dranview 6 | | |
| DVP-PX | Dranview 6 Pro version incl. USB Hardware Dongle | Z818D |
| DVE-PX | Dranview 6 Enterprise Version incl. USB Hardware Dongle | Z818E |
| DVP-TO-DVE | Upgrade Dranview 6 Professional to Enterprise | Z818J |
| METRAWin/MAVOWATT 50 | | |
| METRAwin 10 | METRAWin10 for MAVOWATT 50 | Z852C |
| DVP-MW50 | Dranview Professional MAVOWATT50 incl. USB Hardware Dongle | Z818M |
| DVE-MW50 | Dranview Enterprise MAVOWATT50 incl. USB Hardware Dongle | Z818N |
| DVE-MW50-UP | Upgrade Dranview 6.x PX to MAVOWATT50 | Z818P |
| MAVOWATT 45 | | |
| METRAWin 45 | Data acquisition and evaluation software for MAVOWATT 45 | Z852B |
| MAVO-PDA | Option for power disturbance analysis firmware | Z851B |
| MAVO-FFT | Option for harmonics analysis firmware | Z850B |
| MAVO-TCM | Option for acquiring transients and for frequency converter measurements firmware | Z851C |
| MAVO-FSA | Option for flicker measurment | Z851D |
| Accessories | | |
| MAVO-RC8 | Memory-Card, 8 MB | Z845D |
| adapter | | |
| RR/PS/EU | mains adapter EURO, for one current sensor, 230VAC/50Hz , 3VDC | Z817L |
| RR/PS/UK | mains adapter UK, for one current sensor, 230VAC/50Hz , 3VDC | |
| RR/PS/4PEU | mains adapter EURO, for four current sensosr, 230VAC/50Hz, 3VDC | Z817M |
| RR/PS/4PUK | mains adapter UK, for four current sensosr, 230VAC/50Hz, 3VDC | |
| ACADP-PR9VEURO | mains adapter EURO for PR150/SP1 or PR1500/SP7 | Z817R |
| ACADP-PR9VUK | mains adapter UK for PR150/SP1 or PR1500/SP7 | |
| cable | | |
| KS28 | Lead set | GTY3620065P0001 |
| sensors | | |
| Z823B | Clip-on current/voltage transformer, passive, 1...1000 A~; 0...1V, frequency range 45Hz...10kHz | Z823B |
| WZ12E | Mini-clip-on-current sensor 0,2 ... 150 A | Z823D |
| WZ12F | Mini-clip-on-current sensor 0,02 ... 15 A | Z823E |
| accessories | | |
| XBC-PX5 | ext. battery charger | Z818K |
| VCP-4300 | measuring cable set in nylonbag | |
| RSC-4300 | carrying container | Z818L |
| LPC-PX5 | weatherproof container | |
| Handbook Set | handbook set / A-010S, HB114414-S, HB114415 | Z818I |
| K2010 | Carrying bag for MAVOWATT 45 and accessories | Z504L |
| Electrical Testing | |
| Testers - DIN VDE 0100-600 / IEC 60364-6 | |
| PROFiTEST MASTER | | |
| PROFiTEST MBASE | Universal tester for testing the protective devices ac. to DIN VDE 0100 / to EN 61557, with storage and insulationtest up to 1000 V | M520M |
| PROFiTEST MTECH | alike PROFITEST MBASE, + triptest for RCDs and loop resistance test without tripping the RCD | M520O |
| Sets | | |
| Starterpaket BASE | Universal tester PROFITEST MBASE, VARIO-PLUG, case F2000 | M500M |
| Starterpaket TECH | Universal tester PROFITEST MTECH, VARIO-PLUG, case F2000 | M500N |
| Meisterpaket TECH | Universal tester PROFITEST MTECH, VARIO-PLUG, Earth drill SP350, Drum TR50, PRO-RLOII, Masterkoffer Gerät (Z502A) | M500P |
| PRO-Package E | Universal tester PROFITEST MBASE, Flex AC-current sensor METRAFLEX P300, case F2000 | M500R |
| XTRA-Package E | Universal tester PROFITEST MTECH, Flex AC-current sensor METRAFLEX P300, case F2000 | M500S |
| XTRA-Package XL | Universal tester PROFITEST MTECH, Flex AC-current sensor METRAFLEX P300, VARIO-PLUG, | M500T |
| Earth drill SP350, Drum TR50, Adapter PRO-RLOII, Masterkoffer Gerät (Z502A) | |
| E-CHECK Set | Universal tester PROFITEST MTECH, VARIO-PLUG, in E-CHECK case | M500U |
| Each Paket/Package with DKD-calibration certificate and protocoll-Software ETC | | |
| DKD certificate | (recalibration) each | |
| DIN VDE 0100 simulator | |
| PROFiTEST S1 | Simulating model for testing the protective devices in power installations acc. to DIN VDE 0100/0105 and BGV A3/TRBS 2131 | GTM5101000R0001 |
| S1A-4/10 | Short circuit plug, (1 pack of 10) | GTZ3216000R0001 |
| PROFITEST C | |
| PROFITEST C | Tester for fault-current operated protective devices, and loop impedance test, with factory calibration certificate | M521A |
| PROFITEST C-CH | like PROFITEST C operator guidance in German, swiss type plug | M521B |
| PROFITEST C-GB int. | like PROFITEST C operator guidance in English | M521D |
| PROFITEST C-NL | like PROFITEST C operator guidance in Dutch | M521H |
| PROFITEST C-E | like PROFITEST C operator guidance in Spanish | M521J |
| PROFITEST C-P | like PROFITEST C operator guidance in Potuguese | M521L |
| PROFITEST C-FIN | like PROFITEST C operator guidance in Finnish | M521N |
| PROFITEST C-PL | like PROFITEST C operator guidance in Polish | M521P |
| PROFITEST C-DK | like PROFITEST C operator guidance in Danish | M521Q |
| factory calibration certificate for basic unit | | |
| Set | | |
| Set PROFITEST C/METRISO C | Set: PROFITEST C, METRISO C, 3-pol-Adapter, IrDa0100-Adaptercable, Ks17, HC40 | M508A |
| PROFiTEST 2-a | Universal tester for testing the protective devices for DIN VDE 0100 according to EN 61557, | M520W |
| parts 1, 2, 3, 4, 5, 6, 7; menu-languages D,GB, F, I, E, NL, incl. charge-socket, | |
| 2-pole-Adapter, lead for expansion to 3-pole-Adapter (PRO-A3), 2 alligatorclips, carrying strip, | |
| 1 batteries, instruction manual, factory calibration certificate | |
| PROFiTEST 2-b | PROFITEST 2-a, UK-version, menu languages GB,DK,S,FIN,N,D without plug-insert PRO-..., | M520X |
| instruction manual in english language | |
| PROFiTEST 2-c | PROFITEST 2-a, iberian version, 4xE, P, GB | M520Y |
| PROFiTEST 2-d | PROFITEST 2-a, slav version, menu languages: CZ, SI,HR, D | M520Z |
| factory calibration certificate for basic unit | | |
| DKD certificate | | |
| accessories | | |
| Barcode-Profiscanner-RS232 | barcode reader, RS232 (Laser Sensor) | Z502F |
| PROFISCAN ETC D | ringbinder with significant barcodes for datamanagement | Z502G |
| Z721D | barcode- and label printer incl.sSoftware for USB interface | Z721D |
| SCANWRITE RFID | RFID, Read/Write 13,56 MHz, Bluetooth | Z751F |
| SCANBASE RFID | RFID-reader / RFID scanner for RS232- (13,56 MHz) | Z751G |
| METRAFLEX P300 | lexi AC-cuttent sensor 3/30/300 A, 1V/100mV/10mV/A, with batteries | Z502E |
| PROFiTEST DC-II | Unit for testing the DC-omponent, tripping current, tripping time and for the suppression of the | M523A |
| RCDCB when measuring the loop impedance | |
| 3-pole adapter for DC-II | adapter for PROFITEST DC-II | Z523A |
| factory calibration certificate | | |
| PRO-Schuko | Plug-insert Schuko: D, A, NL, F (MBASE & MTECH: incl. in scope of supply) | GTZ3228000R0001 |
| PRO-CH | Plug-insert ac. SEV: CH | GTZ3225000R0001 |
| PRO-RLO II | 10 m extension lead | Z501P |
| PRO-UNI II | adapter for plugs | Z501R |
| PRO-RSA | Plug-insert: ZA | Z501A |
| PRO-A3 II | 2/3-pol. adapter for MBASE & MTECH | Z501O |
| Masterkoffer Erde | case + acc. for earth test + 2 clamps | Z502B |
| Akkus-Set Master | 8 Akkus, 2300 mAh, in adapter | Z502C |
| 3-Pol-Adapter | 3-Phase-adapter for PROFITEST C with Schuko-plug | Z521A |
| 3-Pol-Adapter / CH | 3-Phase-adapter for PROFITEST C / with CH-plug | Z521B |
| 3-Pol-Adapter / UK | 3-Phase-adapter for PROFITEST C / with UK-plug | Z521C |
| PROFiTEST PSI-BC | same as PROFITEST PSI-E, with alpha-numerical key board and barcode input (phase-out in 2010) | M522D |
| PROFiTEST SI-BC | same as PROFITEST PSI-BC, without printer | M522E |
| Low Ohm Tester | |
| METRAOHM 413 | Low Ohm Tester according to DIN VDE 0413, battery powered | M630A |
| factory calibration certificate | | |
| Insulation measuring instruments | |
| METRISO C | Handheld insulation tester 50...1000 V, battery-powered, factory calibration certificate | M541A |
| METRISO C-GB int. | like METRISO C, operator guidance in english | M541D |
| METRISO C-I | like METRISO C, operator guidance in italian | M541F |
| METRISO C-CZ | like METRISO C, operator guidance in czech | M541G |
| METRISO C-NL | like METRISO C, operator guidance in dutch | M541H |
| METRISO C-E | like METRISO C, operator guidance in spanish | M541J |
| METRISO C-F | like METRISO C, operator guidance in french | M541K |
| METRISO C-P | like METRISO C, operator guidance in portuguese | M541L |
| METRISO C-N | like METRISO C, operator guidance in norwegian | M541M |
| METRISO C-FIN | like METRISO C, operator guidance in finnish | M541N |
| METRISO C-PL | like METRISO C, operator guidance in polish | M541P |
| METRISO C-DK | like METRISO C, operator guidance in danish | M541Q |
| Set PROFITEST C/METRISO C | Set: PROFITEST C, METRISO C, 3-pol-Adapter, IrDa0100-Adaptercable, Ks17, HC40 | M508A |
| Set PROFITEST C/METRISO C-CH | Set: with swiss plug | M508B |
| factory calibration certificate | (recalibration) | |
| DKD-certificate | | |
| Digital insulationtesters - DIN VDE 0413 / EN 61557 | |
| METRSIO 500D | Insulation tester 500 V, battery-powered | GTM5040000R0001 |
| DKD-calibration certificate | | |
| METRISO 1000D | Insulation tester 100 V, 500 V, 1000 V, battery-powered | GTM5050000R0001 |
| DKD-calibration certificate | | |
| METRISO 1000IR | Insulation tester 250 V, 500 V, 1000 V, battery-powered | GTM5050000R0002 |
| DKD-calibration certificate | | |
| METRISO 1000A | Insulation tester 1000 V, battery-powered, incl. carrying bag | M540C |
| factory calibration certificate | | |
| F 837 | Ever-ready case for METRISO 500D, METRISO 1000D and METRISO 1000IR, METRISO 1000A | GTZ3312000R0001 |
| Isolationtester 500V, analog | |
| METRISO 5024 | Isolations- and resistance-tester with V-range, with beeper alarm, battery, incl. Case | M540E |
| factory calibration certificate | | |
| High-voltage insulation testers | |
| METRISO 5000A | High-voltage insulation tester, battery-powered | M580A |
| METRISO 5000AK | High-voltage insulation tester, hand cranked | M580C |
| METRISO 5000A-Set | METRISO 5000A + KY 5000A + Guard 5000A + F2000 | M580S |
| METRISO 5000AK-Set | METRISO 5000AK + KY 5000A + Guard 5000A + F2000 | M580T |
| factory calibration certificate | | |
| Calibration adapter for insulation testers and testers for low ohmig resistances - DIN VDE 0413 | |
| ISO-Kalibrator 1 | Calibration-adapter for check-up of the accuracy of testers for insulation resistance | M662A |
| and low-ohmig resistances (according to DIN VDE 0413, part 1, 2 and 4) | |
| DKD certificate | | |
| High-voltage insulation tester 5000 V, digital | |
| METRISO 5000 D-PI | Insulationtester 5000V, digital | M5810 |
| features 00 (B00 ... M00), incl. DKD-calibration certificate | |
| Options | |
| language for operator guidance | German | A01 |
| English - international | A02 |
| French | A04 |
| Dutch | A05 |
| Spanish | A07 |
| Italian | A10 |
| German (Schweiz) | A15 |
| 110 V | A43 |
| High voltage test | no | B0 |
| with PROFITEST 204HP/2,5kV (not in combination with C1) | B1 |
| with PROFITEST 204HV/5,4kV (not in combination with C1) | B2 |
| Akku | no | C0 |
| with (not in combination with B1, B2) | C1 |
| Signal 204 | no | F0 |
| with | F1 |
| Lead "Guard 5000A" | no | G0 |
| with | G1 |
| LEADEX 5000 | no | H0 |
| with | H1 |
| Printermodule | no | I0 |
| with printermodule SECUTEST PSI | I1 |
| DKD calibration certificate | recalibration | |
| accessories | | |
| Guard 5000A | 1 guard lead + 1 crocodile clip | Z580C |
| Leadex 5000 | 5 m-lead | Z580D |
| KY 5000A | 2 crocodile clips | Z580B |
| Generator 5000A | hand cranket generator for METRISO 5000 A | Z580A |
| KS-C | cable set incl. measuring cable and high-impedance measuring wire for METRISO C, for measurements in T Ohm range | Z541F |
| Earth testers | |
| GEOHM C | earth tester, battery-powered | M590A |
| GEOHM C-GB int. | like GEOHM C, operator guidance in english | M590D |
| GEOHM C-S | like GEOHM C, operator guidance in swedish | M590E |
| GEOHM C-I | like GEOHM C, operator guidance in italian | M590F |
| GEOHM C-CZ | like GEOHM C, operator guidance in czech | M590G |
| GEOHM C-NL | like GEOHM C, operator guidance in dutch | M590H |
| GEOHM C-E | like GEOHM C, operator guidance in spanish | M590J |
| GEOHM C-F | like GEOHM C, operator guidance in french | M590K |
| GEOHM C-P | like GEOHM C, operator guidance in portuguese | M590L |
| GEOHM C-N | like GEOHM C, operator guidance in norwegian | M590M |
| GEOHM C-FIN | like GEOHM C, operator guidance in finnish | M590N |
| GEOHM C-PL | like GEOHM C, operator guidance in polish | M590P |
| GEOHM C-DK | like GEOHM C, operator guidance in danish | M590Q |
| factory calibration certificate | recalibration | |
| GEOHM 5 | |
| GEOHM 5 | earth tester digital, battery-powered, in case with accessories ans batteries, incl. factory calibration certificate | M591A |
| mains adapter | battery charger incl. 4 NiMH-Akkus | Z591C |
| Software LINK-G | Software for storage and report generation | Z591D |
| DKD-calibration certificate | | |
| accessories | | |
| E-Set 3 | Earth tester kit in carrying pouch, 2 reels, 2 test leads 25m long each, | GTZ3301005R0001 |
| 1 test lead 40m long, 2 test leads 3m lang each, 4 earth spikes, 2 spike extractors, 1 hammer | |
| E-Set 4 | Earth tester kit in carrying pouch, 2 reels, 2 test leads 25m long each, | Z590A |
| 1 test lead 40m long, 2 test leads 3m long each, 4 earth drill | |
| E-Set 5 | Earth tester kit in carrying pouch, 1 reel with 25m test lead, | Z590B |
| 2 drums with 50m test lead each, 3 leads 0,5 m long each, 1 lead 2 m long, | |
| 1 test clamp, 4 earth drills 350mm long, 1 duster, 2 writing pads with forms for earth measurements | |
| E-Clip 1 | Generatorclamp: 1000 A / 1 A, 1 mA ... 1200 A, 1 µA ... 1,2 A | Z591A |
| E-Clip 2 | Generatorclamp: 1000 A / 1 A, 0,2 mA ... 1200 A, 0,2 mA ... 1,2 A | Z591B |
| SP 350 | Earth drill, 35 cm long | GTZ3304000R0001 |
| 3-phase current- and measuring adapters | |
| A3-16 | Three phase adapter, 5-pin, for CEE socket outlets 16 A | GTZ3602000R0001 |
| A3-32 | Three phase adapter, 5-pin, for CEE socket outlets 32 A | GTZ3603000R0001 |
| A3-63 | Three phase adapter, 5-pin, for CEE socket outlets 63 A | GTZ3604000R0001 |
| PRO-A3 II | Measuring adapter for systems, three phase, phase sequence (incl. with PROFITEST 0100S-II) | Z501O |
| Z3512A | current sensor 0...1/100/1000 A DC // 1V DC (0,7%...0,2%) | Z225A |
| WZ12C | clip-on current transformer 1mA...10A~, 1mV/mA~; 1A ... 120A~, 1 mV/ A | Z219C |
| TR 25 | Reel with 25 m test lead | GTZ3303000R0001 |
| TR 50 | Drum with 50 m test lead | GTY1040014E34 |
| KS24 | Extension lead, 4m long | GTZ3201000R0001 |
| NA 101 | Charger unit for Akku-Set 0100S | Z501M |
| Akku-Set 0100S | 6 NiMH storage batteries, inserted in battery holder (1300mAh) | Z501B |
| NA 102 | mains adapter for Akku-Set for C-series | Z501N |
| Komp. Akku-Pack Master | 8 Akkus, 2000 mAh, blistered | Z502H |
| Ladernetzteil PROFITEST MASTER | mains adapter 100-240 VAC; Ausg.: 4, 8...12 VDC (Mascot) | Z502P |
| T/F-Fühler | Probe for Temperatur und rel. humidity for METRISO C und PROFITEST 0100S-II+ | Z541A |
| factory calibration certificate | | |
| Z500A | VARIO-PLUG, 3,5...12 mm, set with 3 each | Z500A |
| Sonde 1081 | Triangular electrode for floor measurements according to EN 1081, DIN VDE 0100 | GTZ3196000R0001 |
| Telearm 1 | Telescopic rod for PE-test | GTZ3232000R0001 |
| F2000 | Carrying case for PROFITEST0100S-II, PROFITEST 204, Metriso 5000A/AK, SECUTEST... | Z700D |
| HC30-C | Hardcase for one unit of C-Series and accessories | Z541C |
| HC40 | Hardcase for two units of C-Series and accessories | Z541D |
| Masterkoffer Gerät | box with insert for Profitest Master + accessories | Z502A |
| F837 | Ever-ready case for METRISO 1000A | GTZ3312000R0001 |
| E-CHECK-Koffer | box for E-CHECK-Set | Z502M |
| E-CHECK-Trolley | for E-CHECK-box | Z502N |
| | |
| IrDa-USB Converter | IR-adapter interface - USB | Z501J |
| RS232-USB Converter | RS232-adapter interface - USB | Z501L |
| Testers - DIN VDE 0113 / EN 60204 | |
| PROFITEST 204+ | Tester for tests according to DIN VDE 0113/EN 60204, with RS232 interface and | GTM5027000R0001 |
| CENTRONICS-port for printer, 2 test leads (4 m long) | |
| certificate, instruction manual, CD-ROM with PC-program Winprofi | |
| PROFITEST 204 L+ | like PROFITEST 204 with 12 m leads and start-function | M505C |
| factory calibration certificate for basic unit | | |
| MetraMachine 204/2,5+ | Test set for testing according to DIN VDE 0113 / EN 60204, consisting of: | M504D |
| PROFITEST 204, PROFITEST 204HP, Signal 204, Leadex 204, Caddy 204, certificate | |
| MetraMachine 204-I/2,5+ | Test set for testing according to DIN VDE 0113 / EN 60204, consisting of: | M504E |
| PROFITEST 204, PROFITEST 204HP, Caddy 204, certificate | |
| MetraMachine 439/5,4+ | Test set for testing according to DIN VDE 0660 / EN 60439, consisting of: | M504F |
| PROFITEST 204, PROFITEST 204HV, Signal 204, Leadex 204, Caddy 204, certificate | |
| factory calibration certificate for Sets | | |
| accessories | | |
| Signal 204 | Signal module for high voltage tests according to DIN 0104 | Z504D |
| Kabelschuh 204 | Attachable plug | Z504E |
| Leadex 204 | Extension lead 12 m, fused | Z504C |
| Caddy 204 | Caddy for test set, consisting of PROFITEST 204, 204HP, cover | Z504A |
| Claim 204 | Barrier for HV-tests | Z504G |
| PROFI-MFII | Interface adapter for PC-keyboard | Z504H |
| PS-10P | Pack of 10 chart rolls for PSI-Modul | GTZ3229000R0001 |
| Z3210 | Pack of 10 ribbon cassettes for PSI-Modul | GTZ3210000R0001 |
| PROFITEST 204HP-2,5kV | High voltage unit, up to 2,5 kV, 500 VA (max. 700 VA) | M505A |
| PROFITEST 204HV-5,4kV | High voltage unit, up to 5,4 kV (max. 100 VA) | M505B |
| factory calibration certificate for HV modules | | |
| SECUTEST SI | SI-Modul (keyboard, memory function only with series SECUTEST... , RS232 interface) | M702F |
| SECUTEST PSI | PSI module (printer), incl. 2 chart rolls, 1 ribbon cassette, batteries, instruction manual (phase-out in 2012) | GTM5016000R0001 |
| Phase sequence indicator | |
| PhaseCop 2 | Phase sequence indicator with light-emitting diodes, with leads, | GTM5202000R0001 |
| contact-protected plugs, 3 probes and 1 alligatorclip | |
| F 801 | Ever-ready case for Phase Cop 2 | GTY3172070P01 |
| test protocol for phase sequence indicator | | |
| Phase sequence indicator - DIN VDE 0413 / EN 61557-1/-7 | |
| MetraPhase 1 | Phase sequence indicator, HC20, CAT IV / 600V, 3 measuring leads, 1 crocodilclip | M620A |
| test protocol for phase sequence indicator | | |
| GH18 | Rubber holster and carrying strip | GTZ3212000R0001 |
| Voltage detector - DIN VDE 0680 | |
| DUSPOL - digital LC | Voltage detector, continuity tester, Phase sequence indicator | M611A |
| DUSPOL - analog plus | Voltage detector, Phase sequence indicator | M611B |
| DUSPOL - expert | Voltage detector, continuity tester, Phase sequence indicator | M611C |
| ProfiSafe 400 | Voltage detector, continuity tester, Phase sequence indicator (CAT IV 600V) 12 ... 400V | M630E |
| test protocol | | |
| ProfiSafe 690 | Voltage detector, continuity tester, Phase sequence indicator (CAT IV 600V) 24 ... 690V | M630F |
| test protocol | | |
| METRAVOLT 7A | Analog voltage detector (CAT IV 600V) ... 700V | M630D |
| factory calibration certificate | | |
| METRAVOLT 12D + L | Digital voltage detector (CAT IV 1000V) ... 1200V | M630G |
| factory calibration certificate | | |
| Clip-on meters | |
| METRACLIP 41 | Clip-on meter, digital, up to 40 A AC/DC | M320A |
| METRACLIP 410 | Clip-on meter, digital, up to 400 A AC/DC | M320B |
| METRACLIP 61 | Clip-on meter, digital, 1mA ... 300 A AC / for leakage current | M311D |
| METRACLIP 62 | Clip-on meter, digital, 3 ranges 1mA ... 10 A AC TRMS / DC | M311F |
| factory calibration certificate for METRACLIP 61/62 | | |
| METRACLIP 63 | leakage current clip-on meter, 1 mA AC/DC; D=5mm | M311G |
| METRACLIP 64 | leakage current clip-on meter, 1 mA AC/DC; D=30mm | M311H |
| factory calibration certificate for METRACLIP 63/64 | | |
| DKD-calibration certificate | | |
| METRACLIP 70 | Clip-on meter, digital, 0,2 ... 1000 A AC / 1400 A DC | M312A |
| METRACLIP 72 | Clip-on meter, digital, RMS max. 400 A AC/DC, power, voltage, current, resistance, continuity | M312E |
| factory calibration certificate for METRACLIP 70/72 | | |
| METRACLIP 75 | Clip-on meter, digital, RMS max. 400 A AC/DC, temperature, voltage, resistance, continuity | M312H |
| factory calibration certificate for METRACLIP 75 | | |
| Highvoltagetesting | |
| TR-Spy Mark II | ratio- / phase angle measuring instrument, incl. KS 15 m | M681B |
| Micro-Junior 2 | mikroohmmeter for outdoor use (Akku) incl. measuring lead 3 m (crocodil clips) | M681A |
| TP02 | price per unit | Z681B |
| Micro-Centurion II | microohmmeter up to 200 A incl. measuring lead set 5 m (crocodil clips) | M681E |
| TP01 | temperature probe price per unit | Z681E |
| TR-1 | ratio-/phase angle measuring instrument | M681R |
| TR-1P | ratio- / phase angle measuring instrument, incl. KS 5 m, incl. printer module | M681K |
| WR50-12 | microohmmeter for inductive load, incl. 2 channel | M681M |
| temperaturprobe | price per unit | Z681E |
| WR50-13 | microohmmeter for inductive load, incl. 3 channel | M681N |
| WR50-12R | microohmmeter for inductive load, incl. 2 channel, 19" | M681T |
| temperaturprobe | price per unit | Z681E |
| WR50-13R | microohmmeter for inductive load, incl. 3 channel, 19" | M681P |
| temperaturprobe | price per unit | Z681E |
| T-Rex | option for TR-Spy incl. Kabelset | M681D |
| TREX R | measuring expansion for TR-Mark II R | Z681G |
| TR-Mark II R | ratio-/phase angle measuring instrument | M681S |
| factory calibration certificate per unit | | |
| accessories | | |
| TR0201 | extension lead length 20 m | Z681D |
| TP02 | price per unit | Z681B |
| TP01 | temperature probe price per unit | Z681E |
| TR0203 | trigger switch length 10 m | Z681C |
| MJ0201 | kelvin clipslength 3 m | Z681A |
| TR-Prüfbox | test box for ratio current | M681L |
| Safety tester acc. BGV A3, MPG and type test | |
| SECULIFE ST | SAFETY TEST S3, safety tester, test current 200 mA DC and 10 A AC | M693A |
| SECULIFE ST (int.) | SAFETY TEST S3, safety tester alike M693A, operator guidance in engl. | M693B |
| SECULIFE ST HV | SAFETY TEST S3, safety testeralike M693A, test current 200 mA DC and 25 A AC, HV test max. 6,126 kV DC ( 4 kV AC ) | M693C |
| SECULIFE ST HV (int.) | SAFETY TEST S3, safety tester alike M693C, operator guidance in engl. | M693D |
| DKD calibration certificate | (recalibration) per unit | |
| Weitere Länder- und Sprachmodelle für SECUTEST SIII+ oder SECULIFE ST | |
| SECUTEST SIII+... | basic unit with features 00 (B00 up to KE00), incl. DKD certificate | M7010 |
| SECULIFE ST | basic unit with features 00 (B00 up to KE00), incl. DKD certificate | M6930 |
| Plug and socket | plug and socket for DE | B00 |
| plug and socket for DE and with service-socket | B01 |
| plug and socket for UK, HV Test limited to 1,5 kV | B02 |
| plug and socket for FR | B03 |
| plug and socket for DK, HV Test limited to 1,5 kV | B05 |
| plug and socket for China / AUS; HV Test limited to 1,5 kV | B08 |
| plug and socket for CH | B09 |
| Adapterset for international application (comes with feature B01); HV Test limited to 1,5 kV | B11 |
| Language for operator guidance | German | C00 |
| English | C01 |
| French | C02 |
| Italian | C03 |
| Spanish | C04 |
| Czech | C05 |
| Dutch | C06 |
| HV-Test | without Highvoltagetest | F00 |
| with Highvoltagetest, desired value max. 4 kV AC - output max. 6,126 kV DC | F02 |
| AC-testcurrent | AC-testcurrent 10 A 50/60 Hz for PE-test | G00 |
| AC-testcurrent 25 A 50/60 Hz for PE-test | G01 |
| PA | without patientadapter | J00 |
| with (only M7010) !! | J01 |
| measurements acc. IEC 60601 | without | KA00 |
| with | KA01 |
| database for up to 125 tests | without | KB00 |
| with | KB01 |
| signalling sonde at protective conductor | without | KD00 |
| with (incl. sonde SK5 5m) | KD01 |
| print | no direct printing | KE00 |
| print after every test during automatic testprocedure | KE01 |
| DKD-calibration certificate | (recalibration) SECUTEST SIII+... | |
| DKD-calibration certificate | (recalibration) SECULIFE ST | |
| Facility Management Solution / Modular Testsystem | |
| SECUSTAR FM+ | basic unit with automatic test routine, 50/60 Hz, USB- and RS232-interface, operator guidance in D, GB, F, icl. DKD-calibration certificate | M761A |
| Z752B | maintenance contract | Z752B |
| Z752A | DKD-calibration certificate (recalibration) | Z752A |
| SECULIFE SB | SAFETY DATABASE ANALYSER, incl. DKD-calibration certificate | M691A |
| SECULIFE SB UK | SAFETY DATABASE ANALYSER, version UK | M691B |
| DKD calibration certificate | (recalibration) per unit | |
| SECULIFE SR | SAFETY REMOTE ANALYSER, incl. DKD-calibration certificate | M692A |
| SECULIFE US | SAFETY REMOTE ANALYSER, incl. DKD-calibration certificate, version USA | M692B |
| SECULIFE F | SAFETY REMOTE ANALYSER, incl. DKD-calibration certificate, version F | M692C |
| SECULIFE CH | SAFETY REMOTE ANALYSER, incl. DKD-calibration certificate, version CH | M692D |
| SECULIFE UK | SAFETY REMOTE ANALYSER, incl. DKD-calibration certificate, version UK | M692E |
| DKD calibration certificate | (recalibration) per unit | |
| accessories | | |
| Z753A | 3-pc. pack operator pencils | Z753A |
| Z753B | 2-pc. pack clips | Z753B |
| MINITESTER | Testers for portable electrical devices acc. BGV A3 (VBG4) | |
| MINITEST BASE | MINITEST base GB (English language) | M712E |
| MINITEST PRO | MINITEST pro GB (English language) | M712F |
| METRATESTER | | |
| METRATESTER 5+ | DIN VDE 0701/0702-tester, differ. current measuringmethod, incl. factory calibration certificate | M700D |
| METRATESTER 5-F-E | like METRATESTER 5, panel mounting version | M700T |
| factory calibration certificate for basic unit (recalibration) | | |
| METRATESTER 5+3P | Test-set with METRATESTER 5+ / DIN VDE 0701/0702 | M700K |
| factory calibration certificate | | |
| SECUTEST 3PL | tester for 1- and 3-phase devices acc. to DIN VDE 0701/0702, operator guidance in german | M704B |
| DKD-Calibration Certificate | | |
| SECUTEST 21F | Test panel for workshops with differential current measurement | M601A |
| factory calibration certificate | | |
| SECUTEST WP | Test panel | |
| factory calibration certificate | | |
| SECUTEST SI | SI-Modul (keyboard, memory function only with series SECUTEST... , RS232 interface) | M702F |
| SECUTEST PSI | PSI module (printer), incl. 2 chart rolls, 1 ribbon cassette, batteries, instruction manual (phase-out in 2012) | GTM5016000R0001 |
| PS-10P | Pack of 10 chart rolls for PSI-Modul | GTZ3229000R0001 |
| Z3210 | Pack of 10 ribbon cassettes for PSI-Modul | GTZ3210000R0001 |
| CEE-adapter | CEE-Adapter for testing of 16A and 32A devices | Z745A |
| SECUSTORE | adapter with storage | Z745U |
| RS232-USB Converter | RS232-adapter interface - USB | Z501L |
| SECULOAD | apter for testing no-load voltage of welding device acc. EN 60974 | Z745V |
| adapter | | |
| AT3-III-E | Testcase for connectingn testers SECUTEST SII and SIII, and series M701x | Z745S |
| for tests acc. DIN VDE 0701, 0702, 0751 and IEC 601 | |
| AT3-IIS | adapter for testing of devices with CEE 16- und CEE 32- sockets mit SECUTEST SII und SIII (max. 20 A resistant) | Z745T |
| AT3-II S32 | as AT3-IIS, 32 A resistant | Z745X |
| test protocol for AT3-IIS or AT3-III-E | | |
| AT16-DI | 3-phase 16 A current adapter | Z750A |
| AT32-DI | 3-phase 32 A current adapter | Z750B |
| VL2 E | Testdapter with one- and three phase plug up to CEE 32A | Z745W |
| SECU-cal 10 | Calibrator adapter for testers according to DIN VDE 0701/0702 | Z715A |
| DKD-Calibration Certificate SECU-cal 10 | | |
| EL1 | adapter for testing singlephase extensioncable | Z723A |
| PRO-CH | Plug-insert for use of the adapter EL1 in Switzerland | GTZ3225000R0001 |
| cable | | |
| KS13 | Lead set | GTY3624065P01 |
| SK2 | Probe cable 2m, for SECUTEST... | Z745D |
| SK2W | Probe cable 2m, spiral, for SECUTEST... | Z745N |
| SK5 | probecable 5 m, incl. software | Z745K |
| SK5 | probecable 5 m | Z745O |
| WZ12C | clip-on current transformer 1mA...10A~, 1mV/mA~; 1A ... 120A~, 1 mV/ A | Z219C |
| contact brush | Sonde (contact brush) | Z745G |
| PA4 | patient cable 4mm for SECUTEST ... | Z745L |
| Z3409 | Temperaturprobe Pt100 -40 ... +600 °C | GTZ3409000R0001 |
| cases | | |
| F2000 | case for MINITEST MASTER, PRO and BASE | Z700D |
| F2020 | case for MINITEST 3P MASTER | Z700F |
| K2010 | Carryin case for SECUTEST... and accessories | Z504L |
| Z740B | case for MINITEST BASE und PRO | Z740B |
| BAGSTAR | Carrying case | Z700E |
| accessories for datainput via RFID | | |
| SCANBASE RFID | RFID Scanner for USB-interface (f 125 MHz) | Z751D |
| SCANBASE RFID | RFID Scanner for USB-interface (f 13,56 MHz) | Z751E |
| SCANWRITE RFID | RFID, Read/Write 13,56 MHz, Bluetooth | Z751F |
| SCANBASE RFID | RFID-reader / RFID scanner for RS232- (13,56 MHz) | Z751G |
| Z751R | RFID-tag acc. ISO 15693, ca. 24 x 18 mm, adhesive, 500 pcs. | Z751R |
| Z751S | RFID-tag acc. ISO 15693, ca. 25 mm hole 3 mm, 500 pcs. | Z751S |
| Z751T | RFID-tag acc. ISO 15693, dove ring, 250 pcs. | Z751T |
| ZxxxX | RFID-Tag (125 kHz), structural shape as customer demand | ZxxxX |
| barcode printer, -reader | | |
| Z721D | barcode- and label printer incl.sSoftware for USB interface | Z721D |
| Z722D | Set of labels for Bar code printer Z721D, (dimensions: 24mm; 18mm; 9mm, length 8 m each) | Z722D |
| Z722E | set of labels for barcode- and label printer Z721D, (width: 5x18mm, length 8 m each) | Z722E |
| Z720A | barcode reader, RS232-interface | Z720A |
| Z751A | barcode reader for USB interface | Z751A |
| B3261 | Bar code reader | GTZ3261000R0001 |
| Infrared-thermometer | |
| METRTHERM 1 | Infrared thermometer with laserpointer for contactless measuring of surface temperature | M680A |
| factory calibration certificate | | |
| ETC | protocoll-Software for PROFITEST MASTER, MINITEST, SECULIFE SR, SECUTEST SI | |
| firmware-update | | |
| SECU-Up | updateprogram for SECUTEST (M7010..., M701F, M730...) | Z713C |
| firmware-Upgrade for SECUTEST ... | | |
| IEC 601 | Enables measurements in accordance with IEC 601 (Option KA01), only for SECUTEST SIII, SIII+... | Z853G |
| DBmed | Database | Z853H |
| SECU-dd | Direct Print-Out | Z853L |
| software patManager for SECUTEST, SECUTEST PSI, SECUTEST SI, SECULIFE ST | | |
| patManager | Database- and Protocol Software; Langauge: English, Polish, Russian | Z712A |
| software PC.doc für METRATESTER..., SECUTEST..., MINITEST..., PROFITEST..., METRISO C, GEOHMC | | |
| PC.doc-WORD/EXCEL | Dokumentations- und Verwaltungssoftware für Messungen nach DIN VDE 0701/0702/0751 und EN 60204/ | Z714A |
| VDE 0113 als Zusatz zu MS-WORD / EXCEL, Sprachversionen: deutsch, englisch, französisch, finnisch, polnisch | |
| PC.doc-ACCESS | Dokumentations- und Verwaltungssoftware für Messungen nach DIN VDE 0701/0702/0751 und EN 60204/ | Z714B |
| VDE 0113 als Zusatz zu MS-Access, Sprachversionen: deutsch, englisch | |
| PC.doc-upgrade | Upgrade von PC.doc win/med ... auf PC.doc-WORD bzw. PC.doc-ACCESS | Z714C |
| PC.base-upgrade | Upgrade von PC.base auf PC.doc-WORD | Z714D |
| Power Supplies | Computer-controlled laboratory power supplies | |
| SYSKON P series | |
| SYKON P1500 | SYSKON P1500-060-060 SYSTEM KONSTANTER | K353A |
| SYKON P3000 | SYSKON P1500-060-060 SYSTEM KONSTANTER | K363A |
| SYKON P4500 | SYSKON P1500-060-060 SYSTEM KONSTANTER | K364A |
| IEEE488-Interface | Option IEEE-488-Interface for SYSKON-Konstanter | K384A |
| Netz-Kabel | Netz-Drehstromkabel 3,5 m für KONSTANTER | K991B |
| SYKON TRANSPORTER | SYSKON TRANSPORTER, case for transporting SYSKON KONSTANTER | Z116A |
| DKD calibration certificate for SYSKON-KONSTANTER (recalibration) | | |
| SSP-KONSTANTER | |
| 32 N 20 RU 10 P | KONSTANTER SSP 120-20 | K320A |
| 32 N 40 RU 6 P | KONSTANTER SSP 120-40 | K321A |
| 32 N 80 RU 3 P | KONSTANTER SSP 120-80 | K322A |
| 32 N 20 RU 20 P | KONSTANTER SSP 240-20 | K330A |
| 32 N 40 RU 12 P | KONSTANTER SSP 240-40 | K331A |
| 32 N 80 RU 6 P | KONSTANTER SSP 240-80 | K332A |
| 32 N 32 RU 18 P | KONSTANTER SSP 320-32 | K334A |
| IEEE488-Interface | Option for SSP 32 N | K380A |
| 62 N 52 RU 25 P | KONSTANTER SSP 500-52 | K344A |
| 62 N 80 RU 12,5 P | KONSTANTER SSP 500-80 | K341A |
| 62 N 52 RU 50 P | KONSTANTER SSP 1000-52 | K345A |
| 62 N 80 RU 25 P | KONSTANTER SSP 1000-80 | K343A |
| 64 N 52 RU 100 P | KONSTANTER SSP 2000-52 | K352A |
| 64 N 80 RU 50 P | KONSTANTER SSP 2000-80 | K351A |
| 64 N 52 RU 150 P | KONSTANTER SSP 3000-52 | K362A |
| 64 N 80 RU 75 P | KONSTANTER SSP 3000-80 | K361A |
| IEEE488/RS232-Interface | Option for SSP 62 N/64 N-BZ3, IEEE488/RS232 combination | K382A |
| RS232-Interface | RS232-Interface for SSP 62 N/64 N-BZ3 | K383A |
| K991A | Jumper-mains cable 0,4 m for KONSTANTER | K991A |
| factory calibration certificate for KONSTANTER SSP | | |
| MSP-KONSTANTER | |
| 64 D 42 P | MSP-KONSTANTER basis device (housing) | K370A |
| operation unit | MSP-KONSTANTER operation unit | K371A |
| ES 31 K 2x8 R 3 P | MSP-KONSTANTER-plug-in-unit, 2 output, 8V, 3A, 2 x 24 W | K372A |
| ES 31 K 2x16 R 1,5 P | MSP-KONSTANTER-plug-in-unit, 2 output, 16V, 1,5A, 2 x 24 W | K372B |
| ES 31 K 2x40 R 0,6 P | MSP-KONSTANTER-plug-in-unit, 2 output, 40V, 0,6A, 2 x 24 W | K372C |
| ES 31 K 7 R 7 P | MSP-KONSTANTER-plug-in-unit, 1 output, 7V, 7A, 1 x 49 W | K372D |
| ES 32 K 30 R 4 P | MSP-KONSTANTER-plug-in-unit, 1 output, 30V, 4A, 1 x 120 W | K373A |
| ES 32 K 80 R 1,5 P | MSP-KONSTANTER-plug-in-unit, 1 output, 80V, 1,5A, 1 x 120 W | K373B |
| factory calibration certificate for MSP KONSTANTER modules | | |
| Analog-controlled laboratory power supplies | |
| SLP-KONSTANTER | |
| 32 N 20 R 10 | KONSTANTER SLP 120-20 | K220A |
| 32 N 40 R 6 | KONSTANTER SLP 120-40 | K221A |
| 32 N 80 R 3 | KONSTANTER SLP 120-80 | K222A |
| 32 N 20 R 20 | KONSTANTER SLP 240-20 | K230A |
| 32 N 40 R 12 | KONSTANTER SLP 240-40 | K231A |
| 32 N 80 R 6 | KONSTANTER SLP 240-80 | K232A |
| 32 N 32 R 18 | KONSTANTER SLP 320-32 | K234A |
| factory calibration certificate for SLP-KONSTANTER | | |
| LSP-KONSTANTER | |
| 33 K 7 EU 5/2x25 R 1 D | LSP triple, digital indication | K270A |
| factory calibration certificate | | |
| Laboratory power supplies LSP 32K | |
| 32 K 18 R 5 | KONSTANTER LSP 100-18 | K110A |
| 32 K 36 R 3 | KONSTANTER LSP 100-36 | K111A |
| 32K 72 R 1,5 | KONSTANTER LSP 100-72 | K112A |
| factory calibration certificate for LSP-KONSTANTER | | |
| SSL - Konstanter | |
| 32 EL 150 R30 | KONSTANTER SSL 150 | K850A |
| 32 EL 300 R30 | KONSTANTER SSL 300 | K851A |
| factory calibration certificate for SSL-KONSTANTER | | |
| Accessories forKONSTANTER | |
| K990A | Mounting-Set 1x32N for KONSTANTER | K990A |
| K990B | Mounting-Set 2x32N for KONSTANTER | K990B |
| K931A | Bus-cable IEEE/IEEE, 2m for KONSTANTER | K931A |
| K931B | Bus-cable RS232; 0,4 m for KONSTANTER | K931B |
| Z3241 | RS232 interface cable, 2m | GTZ3241000R0001 |
| Software | |
| Software and drivers are available for free of charge from our homepage | |
| Seminars / Practical courses IN GERMAN LANGUAGE | |
| Prüfung von elektrischen Anlagen und Betriebsmitteln | | |
| GTT1220 | Messungen zur Prüfung der Wirksamkeit von Schutzmaßnahmen in Niederspannungsanlagen nach DIN VDE 0100/0105 und BGV A3/TRBS 2131 mit der PROFITEST MASTER Serie und der ETC-Software (2 Tage) | GTT1220000R0001 |
| GTT1211 | Wiederholungsprüfungen an elektrischen Anlagen und Betriebsmitteln nach Forderung der BGV A3/TRBS 2131 mit den Geräten SECUTEST SII und S2N+ (2 Tage) | GTT1211000R0001 |
| GTT1212 | Wiederholungsprüfungen an elektrischen Betriebsmitteln durch "Unterwiesene Personen" nach BGV A3/TRBS 2131 mit den Geräten SECUTEST SII und S2N+ (1 Tag) | GTT1212000R0001 |
| GTT1216 | Ausbildung zur EUP (Seminardauer 2 Tage) | GTT1216000R0001 |
| GTT1213 | Sicherheitsprüfungen an medizinischen Geräten mit dem Prüfgerät SECUTEST 0751/601, SIII (1Tag) | GTT1213000R0001 |
| GTT1214 | Elektrische Sicherheitsprüfung an elektrisch betriebenen Pflegebetten mit den Geräten SECUTEST SII, S2N+ und SIII (1 Tag) | GTT1214000R0001 |
| GTT1215 | Messungen zur Prüfung elektrischer Ausrüstung von Maschinen nach DIN VDE 0113 / EN 60204 (1 Tag) | GTT1215000R0001 |
| GTT3010 | Rationelle Prüfungen im Gebäudemanagement gem. BGV A3/TRBS 2131, mit SECUSTAR FM (2 Tage) | GTT3010000R0001 |
| GTT3015 | Prüfen von Lichtbogenschweißeinrichtungen gemäß BetrSichV, DIN CDE 0544-4 und die Software PS3 | GTT3015120R0001 |
| individuell | Aufbau Ihres Prüfmanagements vor Ort für DIN VDE 0702, 0105, 0113T1 | |
| GTT3030 | Startpaket (Dauer 1 Tag) | GTT3030000R0001 |
| GTT3040 | Standardpaket (Dauer 2 Tage) | GTT3040000R0001 |
| GTT3050 | Comfortpaket (Dauer 3 Tage) | GTT3050000R0001 |
| GTT3060 | Premiumpaket (Dauer 5 Tage) | GTT3060000R0001 |
| Grundlagen der Netzstöranalyse | | |
| GTT1643 | Netzstöranalyse sowie Leistungs- und Energieanalyse mit MAVOWATT 50 | GTT1643000R0001 |
| GTT1645 | Geräte-Einweisung Mavowatt 30/40/70 und Software Dranview | GTT1645000R0001 |
| PC-Auswerte-Software zu den Prüfgeräten SECUTEST.. Und PROFITEST... (Seminardauer jeweils 1 Tag) | | |
| GTT1224H | Software PS3 Version 9, Grundlagen, Geräte, Software, Betreibsmittel-Management | GTT1224000R0001 |
| GTT1224K | Software PS3, Grundlagen, Geräte, Prüfmanagement für Anlagen | GTT1224000R0001 |
| GTT1226 | Anwendersoftware PC.doc-ACCESS | GTT1226000R0001 |
| GTT1227A | Software ELEKRTROmanager für Prüfungen ortsveränderlicher elektrischer Betriebsmittel | GTT1227000R0001 |
| GTT1227B | Software ELEKTROmanager für Prüfungen an Niederspannungsanlagen mit fest angeschlossenen Betriebsmitteln | GTT1227000R0001 |
| | |
| PROFiTEST 0100S-O-II+ | PROFITEST 0100S-II, slav version, menu languages: CZ, SI,HR, D | M520L |
| Clip 0100S | current clamp for fault current | Z501E |
| METRAVOLT 12D | Digital voltage detector (CAT IV 1000V) ... 1200V | M630C |