Fluke Bm. ISA601 - Automated electrical-safety analyzer

The 601 Pro SeriesXL is an automated electrical-safety analyzer that meets stringent international standards for electrical-safety testing of hospital and laboratory electromedical equipment. The 601 Pro SeriesXL is also available with a built-in printer. (See “Models.”)

Detaily
Špecifikácie

Standard Features

EN60601-1, EN601010-1, and AAMI test loads (user selectable)
Multiple enclosure-leakage points
Multiple patient-applied-part types
Power ON/OFF delay
DC only for patient- and auxiliary-leakage tests
User-programmable test sequences
Manual, auto, step, and computer-control modes
ASCII data transfer
Memory for up to 1000 device-information records

Optional Features

Onboard thermal printing

Biomedical Test > Electrical Safety Analyzers >

601 Pro Series XL International Safety Analyzer

Specifications

Voltage

(single and dual lead)
Range:	0 to 300 V True RMS
Accuracy:	DC - 100 Hz ± 1.5 % of reading ± 1 LSD

Insulation Resistance

Range:	0.5 to 400.0 MΩ
Accuracy:	± 5 % of reading ± 2 LSD

Current Consumption

Range:	0 to 15 A ac True RMS
Accuracy:	± 5 % of reading ± 2 LSD

Mains on Applied Part

Applied Voltage:	≥ 110 % of mains voltage
Accuracy:	± 2 % of reading ± 6 µA

Supply Voltage

90 to 265 Vac, autoswitching

Protective Earth Resistance

Range:	0.000 to 2.999 Ω
Accuracy:	± 5 % of reading ± 4 mΩ (1 A, 10 A, and 25 A test currents) (Refer to Operator’s Manual for additional specs qualifying the effects on accuracy of variations in load inductance and phase angle.)

IEC601-1 and AAMI Leakage Currents

Range:	0 to 8000 µA True RMS
Accuracy:	(per IEC601-1 or AAMI filter)
	- DC - 1 kHz ± 1 % of reading ± 1 µA
	- 1 to 100 kHz ± 2 % of reading ± 1 µA
	- 100 kHz to 1 MHz ± 5 % of reading ± 1 µA
DC-Only Frequency Response:	DC - 5 Hz (approx)

IEC1010-1 Leakage Current

Range:	0 to 16000 µA True RMS (For some leakage tests, displayed range may be 0 to 9999 when using IEC1010 test load.)
Accuracy:	(per IEC1010-1 figure A.1 filter)
	- DC - 1 kHz ± 2 % of reading ± 2 µA
	- 1 to 100 kHz ± 4 % of reading ± 2 µA
	- 100 kHz to 1 MHz ± 10 % of reading ± 10 µA
DC-Only Frequency Response:	DC - 5 Hz (approx)

ECG Simulation and Performance Testing

ECG Complex:	30, 60, 120, 180, 240 BPM
Performance
Pulse:	30, 60 BPM, 63 ms pulse width
600 to 700 µs rise and fall time
Sine Waves:	10, 40, 50, 60, 100 Hz
Square Wave:	0.125, 2.000 Hz (50 % duty cycle)
Triangle Wave:	2 Hz, 2 mV

Arrhythmia

	Atrial fibrillation
	Atrial flutter
	Atrial tachycardia
	Idioventricular
	PVC1
	R on T
	Run
	Ventricular fibrillation
	Ventricular tachycardia
Performance:	± 2 % of reading for rate or ± 5 % of reading for amplitude, fixed at 1 mV peak on a Lead II ECG connection (except for triangle wave, which is 2 mV peak-to-peak)