Fluke 5500A/LEADS Test Lead Set - Príslušenstvo k multikalikrátoru

Designed for use on the 5500A Multi-Product Calibrators

The 5500A/LEADS are professional-quality lead sets that ensure you always have the right probes and connectors for the job at hand. These top quality leads provide years of service and are designed to minimize connection loss and thermal effects. Each test lead has silicon insulation for easy handling and is rated at 1000V. In addition to the test leads, each Fluke lead set contains a full set of thermocouple extension wires with mini-thermocouple connectors on each end for fast, trouble-free calibration of thermocouple instruments. Each Fluke lead set comes with a soft carrying pouch for convenient transporting and storage.

Detaily
Špecifikácie

Parts included in the 5500A/LEADS test lead set (1 each except as noted):

Soft case, 3 compartment - 12” x 10” x 2.5” (30.48 x 25.4 x 6.35 cm) - with carrying strap
Soft case 6.5” x 11” x 2.5” (16.51 x 27.94 x 6.35 cm)
Test lead, stackable, 100 cm, black
Test lead, stackable, 100 cm, red
Test lead, stackable, 100 cm, white
Test lead, stackable, 100 cm, yellow
T/C assembly, K-type, beaded, molded plug
T/C assembly, J-type, beaded, molded plug
T/C, molded-plug, copper shorting
Thermocouple adapter 80AK xx mini T/C to banana
Thermocouple extension, 3 feet (1M), B
Thermocouple extension, 3 feet (1M), E
Thermocouple extension, 3 feet (1M), J
Thermocouple extension, 3 feet (1M), K
Thermocouple extension, 3 feet (1M), N
Thermocouple extension, 3 feet (1M), R
Thermocouple extension, 3 feet (1M), S
Thermocouple extension, 3 feet (1M), T
Thermocouple extension, 3 feet (1M), CU
Dual binding post adapters, banana plug, 2ea.
High current, 30A, test lead, 2ea.
Shielded calibration test leads, 24”, banana plug, 2ea.

One-year warranty

Test leads:

Category I, rated 1000V
Rated current, 10A

Thermocouple extensions:

16 Ga
Teflon jacket
Standard limits of error

Calibration Instruments > DC/LF Electrical Calibration > Calibrators >

5500A Multi-Product Calibrator

Technical Specifications

Voltage DC

Range:	0 to ±1020V
Best 1 Year Specification:	±50 ppm of setting

Current DC

Range:	0 to ±11A
Best 1 Year Specification:	±0.01% of setting

Resistance

Range:	0 to 3.29.999 MΩ
Best 1 Year Specification:	±0.009% of setting

Voltage AC

Range:	1 mV to 1020V
	10 Hz to 500 kHz, Sine
Best 1 Year Specification:	±0.03% of setting

Current AC

Range:	29 m A to 11A
	10 Hz to 10 kHz, Sine
Best 1 Year Specification:	±0.06% of setting

Capacitance

Range:	0.33 nF to 1.1 mF
Best 1 Year Specification:	±0.25% of setting

Thermocouple Source and Measure

Range:	-250°C to +2316°C (11 types)
Best 1 Year Specification:	± 0.14°C of setting

RTD Source

Range:	-200°C to +630°C
	(8 types)
Best 1 Year Specification:	±0.03°C of setting

DC Power

Range:	109 m W to 11 kW
Best 1 Year Specification:	± 0.08% of setting

AC Power

Range:	109 m W to 11 kW
	45-65 Hz, PF=1
Best 1 Year Specification:	± 0.15% of setting

Phase

Range:	0 to ± 179.99°
Best 1 Year Specification:	±25 ppm of setting

Frequency

Range:	0.01 Hz to 2.0 MHz
Best 1 Year Specification:	±25 ppm of setting

General Specifications

Warm up Time

Twice the time since last warmed up, to a maximum of 30 minutes

Settling Time

Less than 5 seconds for all functions and ranges except as noted

Standard Interfaces

IEEE-488 (GPIB), RS-232, 5725A (5500A only)

Temperature Performance

Operating:	0°C to 50°C
Calibration:	(tcal): 15°C to 35°C
Storage:	-20°C to 70°C

Temperature Coefficient

Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C

Relative Humidity

Operating:	< 80% to 30°C, < 70% to 40°C, < 40% to 50°C
Storage:	< 95%, non-condensing

Altitude

Operating:	3,050m (10,000 ft) maximum
Non-operating:	12,200m (40,000 ft) maximum

Safety

Designed to comply with IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994; CAN/CSA-C22.2 No. 1010.1-92

Analog Low Isolation

20V

EMC

Designed to comply with FCC Rules Part 15

Line Power

Line Voltage (selectable):	100V, 120V, 220V, 240V
Line Frequency:	47 to 63 Hz
Line Voltage Variation:	: ± 10% about line voltage setting

Power Consumption

300 VA

Dimensions

Height:	17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit
Width:	43.2 cm (17 in), standard rack width
Depth:	47.3 cm (18.6 in) overall

Weight (without options)

20 kg (44 lbs.)

Absolute Uncertainty Definition

5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated.

Specification Confidence Interval

99%