Fluke PM6303 - RCL Meter - ELSO Philips Service

Fluke PM6303 - RCL Meter

RCL Meter

Effective, economic testing that's quick and easy to use

The PM 6303A is quick and simple to operate, on the manufacturing floor as a quality assurance tool or in the service lab for quick tests of a wide variety of components. Its simple operation and 0.25% basic accuracy make the PM 6303A equally at home in the classroom for education and training environments.

Detaily
Špecifikácie

PM 6303A/01 RCL Meter (1kHz)

Technical Specifications

AC test mode

Test frequency:	1 kHz
Test frequency accuracy:	0.025%
Test signal level:	2V via 400Ω source
Basic measurement accuracy:	0.25% ± 1 digit

DC bias

Internal:

Maximum measurement ranges

Impedance/Resistance Z or RAC:	0.000Ω to 200 MΩ
Capacitance C:	0.0 pF to 100 mF
Inductance L:	0.0 mH to 32 kH
Quality factor Q:	: 0.0002 to 500
Dissipation factor D:	0.002 to 500
Phase angle F:	-90.0 to +90.0 deg

Maximum resolution

Impedance/Resistance Z or RAC:	01 MΩ
Capacitance C:	0.1 pF
Inductance L:	0.1 mH
Quality factor Q:	0.001
Dissipation factor D:	0.001
Phase angle F:	0.1 deg

Circuit diagram

7 different equivalent circuit diagrams

Auto mode

Read-out:	Dominant parameter
Equivalent circuit diagram:	Parallel for R+C
	Serial for R+L

Manual Mode

Read-out:	Dominant or secondary parameter
Equivalent circuit diagram:	Parallel or serial selectable

Measurement update rate

2 measurements/s

Trim function

Open circuit:	Open circuit compensation
	Z > 100 kΩ
Short circuit:	Short circuit compensation
	Z < 10Ω

Stored settings (non-volatile memory)

Front panel settings:

1 (trim figures included)

Calibration Interval

1 year

Environmental Conditions

Operating temperature:	0°C to 50°C
Storage temperature:	-40°C to 70°C
Power requirements:	100/120/220/240V ± 10%
Line frequency:	50 to 100 Hz
Power consumption:	16 VA
Safety:	According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2
EMC:	According to CE regulation 89/336: Emission according to EN 55011, Group 1 Class B, respectively CISPR 11. Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4
Warm-up time:	5 minutes