| Link | TYPE – Delta Elektronika BV | V out (V) | I out (A) |
| SYSTEM, BENCH POWER SUPPLIES | |||
| web | SM-series | ||
| web | SM700 – no more produced | no more produced | |
| web | SM 1540-D - no more produced | 0-15 | 0-40 |
| web | SM 7020-D - no more produced | 0-35, 35-70 | 0-20, 0-10 |
| web | SM 3004-D - no more produced | 0-150, 150-300 | 0-4, 0-2 |
| web | SM800 800W | ||
| web | SM 7.5-80 | 0-7.5 | 0-80 |
| web | SM 18-50 | 0-18 | 0-50 |
| web | SM 70-AR-24 | 0-35, 0-70 | 0-24, 0-12 |
| web | SM 400-AR-4 | 0-200, 0-400 | 0-4, 0-2 |
| web | SM1500 1500W | ||
| web | SM 15-100 | 0-15 | 0-100 |
| web | SM 35-45 | 0-35 | 0-45 |
| web | SM 52-30 | 0-52 | 0-30 |
| web | SM 52-AR-60 | 0-26, 0-52 | 0-60, 0-30 |
| web | SM 70-22 | 0-70 | 0-22 |
| web | SM 120-13 | 0-120 | 0-13 |
| web | SM 300-5 | 0-300 | 0-5 |
| web | SM 400-AR-8 | 0-200,0-400 | 0-8,0-4 |
| web | SM3000 3000W | ||
| web | SM 15-200 D | 0-15 | 0-200 |
| web | SM 30-100 D | 0-30 | 0-100 |
| web | SM 45-70 D | 0-45 | 0-70 |
| web | SM 45-70 D-P087 (40V-80A) | 0-40 | 0-80 |
| web | SM 70-45 D | 0-70 | 0-45 |
| web | SM 120-25 D | 0-120 | 0-25 |
| web | SM 300-10 D | 0-300 | 0-10 |
| web | SM3300 3300W inc. ETH + Sequncer | ||
| web | SM 18-220 | 0-18 | 0-220 |
| web | SM 66-AR-110 | 0-33, 0-66 | 0-110, 0-55 |
| web | SM 330-AR-22 | 0-165, 0-330 | 0-22, 0-11 |
| web | SM 660-AR-11 | 0-330, 0-660 | 0-11, 0-5.5 |
| web | SM6000 6000W | ||
| web | SM 15-400 | 0-15 | 0-400 |
| web | SM 30-200 | 0-30 | 0-200 |
| web | SM 45-140 | 0-45 | 0-140 |
| web | SM 60-100 | 0-60 | 0-100 |
| web | SM 70-90 | 0-70 | 0-90 |
| web | SM 120-50 | 0-120 | 0-50 |
| web | SM 300-20 (1200V insulated, ISO AMP, Encoder) | 0-300 | 0-20 |
| web | SM 600-10 (1200V insulated, ISO AMP, Encoder) | 0-600 | 0-10 |
| Options SM-series | |||
| P001 Screwdriver adjustment V and I at front panel | |||
| P002 Screwdriver adjustment V, I and OVP at rear panel (only for SM700 and SM3000) | |||
| P099 No foots on unit | |||
| P069 Increased maximum output | |||
| P089 Enforced sec. isolation 1000V | |||
| Options for SM700-series | |||
| P021 (Extra diode on output SM 7020-D) | |||
| P022 (Extra diode on output SM 3004-D) | |||
| web | P140 (Power Sink for SM 1540-D) | ||
| web | P141 (Power Sink for SM 7020-D) | ||
| Options for SM800-series | |||
| P201 (Ext. diode for output SM 400-AR-4) | |||
| web | P249 (ISO AMP CARD built-in) - isolation amplifier | ||
| web | P254 (PSC 232 INT built-in) – Serial Interface | ||
| web | P255 (PSC 488 INT built-in) – IEEE Interface | ||
| web | P256 (PSC ETH INT built-in) – Ethernet Interface | ||
| web | P271 (PSC-PB INT built-in) – Profibus interface | ||
| web | P272 (PSC-CAN INT built-in) – CAN Interface | ||
| P257 (SM 18-50 front panel connection) | |||
| P258 (SM 70-AR-24 front panel connection) | |||
| P259 (SM 400-AR-4 front panel connection) | |||
| web | P245 (Power sink for SM 7.5-80) | ||
| web | P246 (Power sink for SM 18-50) | ||
| web | P247 (Power sink for SM 70-AR-24) | ||
| web | P248 (Power sink for SM 400-AR-4) | ||
| P236 (Potentiometers repl. with encoders) | |||
| 19" Rack adapters for SM800-series | |||
| RA19-1SM800 for 1 pc SM800 | |||
| RA19-2SM800 for 2 pcs SM800 | |||
| High speed programming opties SM800-series | |||
| P250 for the SM 7.5-80 (High speed programming) | |||
| P251 for the SM 18-50 (High speed programming) | |||
| P252 for the SM 70-AR-24 (High speed programming) | |||
| P253 for the SM 400-AR-4 (High speed programming) | |||
| Options for SM1500-series | |||
| web | P218 (ISO AMP CARD built-in) | ||
| P197 (Ext. diode for output SM 52-30) | |||
| P198 (Ext. diode for output SM 52-AR-60) | |||
| P199 (Ext. diode for output SM 120-13) | |||
| P200 (Ext. diode for output SM 300-5) | |||
| P201 (Ext. diode for output SM 400-AR-8) | |||
| web | P184 (PSC 488 INT built-in) | ||
| web | P183 (PSC 232 INT built-in) | ||
| web | P177 (PSC-ETH INT built-in) | ||
| web | P273 (PSC-PB INT built-in) – Profibus interface | ||
| web | P274 (PSC-CAN INT built-in) – CAN Interface | ||
| web | P202 (Power Sink for SM 15-100) | ||
| web | P203 (Power Sink for SM 35-45) | ||
| web | P204 (Power Sink for SM 52-30) | ||
| web | P205 (Power Sink for SM 52-AR-60) | ||
| web | P206 (Power Sink for SM 70-22) | ||
| P220 (Potentiometers repl. with encoders) | |||
| High speed programming options SM1500 | |||
| P210 for the SM 15-100 (High speed programming) | |||
| P211 for the SM 35-45 (High speed programming) | |||
| P212 for the SM 52-30 (High speed programming) | |||
| P213 for the SM 52-AR-60 (High speed programming) | |||
| P214 for the SM 70-22 (High speed programming) | |||
| P215 for the SM 120-13 (High speed programming) | |||
| P216 for the SM 300-5 (High speed programming) | |||
| P217 for the SM 400-AR-8 (High speed programming) | |||
| Options for SM3000-series | |||
| P023 (Extra diode on output SM 300-10 D) | |||
| web | P127 (Power Sink for SM 15-200 D) | ||
| web | P128 (Power Sink for SM 30-100 D) | ||
| web | P129 (Power Sink for SM 45-70 D) | ||
| web | P130 (Power Sink for SM 70-45 D) | ||
| web | P145 (ISO AMP CARD built-in) | ||
| web | P146 (PSC 232 INT built-in) | no analog | |
| web | P149 (PSC ETH INT built-in w/o user I/O) | no analog | |
| web | P164 (PSC 488 INT built-in) | no analog | |
| web | P275 (PSC-PB INT built-in) – Profibus interface | no analog | |
| web | P276 (PSC-CAN INT built-in) – CAN Interface | no analog | |
| High speed programming options SM3000 | |||
| P104 for the SM 15-200 D (High speed programming) | |||
| P031 for the SM 30-100 D (High speed programming) | |||
| P105 for the SM 45-70 D (High speed programming) | |||
| P032 for the SM 70-45 D (High speed programming) | |||
| P106 for the SM 120-25 D (High speed programming) | |||
| P061 for the SM 300-10 D (High speed programming) | |||
| Options for SM3300 | |||
| High speed programming options SM3300 | |||
| P300 High Speed Programming option SM 18-220 | |||
| P302 High Speed Programming option SM 66-AR-110 | |||
| P304 High Speed Programming option SM330-AR-22 | |||
| P305 High Speed Programming option SM660-AR-11 | |||
| Options for SM6000-series | |||
| P151 (Ext. diode for output SM 45-140) | |||
| P152 (Ext. diode for output SM 120-50) | |||
| P153 (Ext. diode for output SM 300-20) | |||
| web | P154 (ISO AMP CARD built-in) | ||
| web | P155 (PSC 232 INT built-in) | ||
| web | P156 (PSC 488 INT built-in) | ||
| web | P157 (PSC-ETH INT built-in) | ||
| web | P277 (PSC-PB INT built-in) – Profibus interface | ||
| web | P278 (PSC-CAN INT built-in) – CAN Interface | ||
| P165 (High input voltage 440, 480VAC) | |||
| P220 (Potentiometers repl. with encoders) | |||
| web | P230 (Power sink for the SM15-400) | ||
| web | P231 (Power sink for SM 30-200) | ||
| web | P232 (Power sink for SM 45-140) | ||
| web | P233 (Power sink for SM 60-100) | ||
| web | P234 (Power sink for SM 70-90) | ||
| High speed programming options SM6000 | |||
| P166 for the SM 15-400 (High speed programming) | |||
| P167 for the SM 30-200 (High speed programming) | |||
| P168 for the SM 45-140 (High speed programming) | |||
| P169 for the SM 60-100 (High speed programming) | |||
| P170 for the SM 70-90 (High speed programming) | |||
| P171 for the SM 120-50 (High speed programming) | |||
| P172 for the SM 300-20 (High speed programming) | |||
| ES-series 150W | |||
| web | ES 015-10 | 0-15 | 0-10 |
| web | ES 030-5 | 0-30 | 0-5 |
| web | ES 075-2 | 0-75 | 0-2 |
| web | ES 0300-0.45 | 0-300 | 0-450m |
| web | EST 150 – tripple | 2×0-20, 1×0-20 | 2×0-2.5, 1×0-5 |
| Options ES150 | |||
| P001 Screwdriver adjustment V and I at front panel | |||
| P069 Increased maximum output (small percentage with derating) | |||
| web | P148 (PSC 232 INT built-in) | ||
| web | P150 (PSC-ETH INT built-in w/o user I/O) | ||
| web | P279 (PSC-PB INT built-in) – Profibus interface | no analog | |
| web | P280 (PSC-CAN INT built-in) – CAN Interface | no analog | |
| Rear connection + Remote sensing options ES150 | |||
| P119 for the ES 015-10 (Rear connection + sensing) | |||
| P120 for the ES 030-5 (Rear connection + sensing) | |||
| P121 for the ES 075-2 (Rear connection + sensing) | |||
| P122 for the ES 0300-0.45 (Rear connection + sensing) | |||
| web | ES-series 300W | ||
| web | ES 030-10 | 0-30 | 0-10 |
| Options ES 030-10 | |||
| web | P179 (PSC-ETH INT built-in w/o user I/O) | ||
| web | P180 (PSC 232 INT built-in) | ||
| P185 (Rear connection) | |||
| web | P281 (PSC-PB INT built-in) – Profibus interface | no analog | |
| web | P282 (PSC-CAN INT built-in) – CAN Interface | no analog | |
| 19" Rack adapters for ES-series | |||
| RA19-1ES for 1 pc ES | |||
| RA19-2ES for 2 pcs ES | |||
| RA19-ES-PSC for 1 pc ES + 1 pc PSC | |||
| RA19-ES-PSC-ETH for 1 pc ES + 1 pc PSC-ETH | |||
| MODULAR POWER SUPPLIES | |||
| web | SX-series | ||
| web | 75 SX 5 75W | 3.5-6 | 13 |
| web | 75 SX 15-15 75W | 2x6-15 | 2.5 |
| web | 150 SX 5 150W | 3.5-6 | 26 |
| web | 150 SX 15-15 150W | 2x6-15 | 5 |
| web | 150 SX 75-75 150W | 2x15-75 | 1 |
| web | 150 SX 200-200 150W | 2x35-200 | 0.3 |
| web | ST 150 | 3.5-6 2x6-15 | 13/2.5 |
| Frontpanels for Eurorack mounting | |||
| F 8-3 for 75 SX ... | |||
| F 8-6 for 150 SX ... | |||
| F 8-6 T for ST 150 | |||
| Accessories for wall + rail mounting of SX-series | |||
| CL 15 to fix H15 | |||
| W 8-3 for 75 SX ... | |||
| W 8-6 for 150 SX ... | |||
| AR1 adapter for rail | |||
| H 95 kit for 75 SX ... | |||
| H 155 bracket for 150 SX ... | |||
| Bench adapters | |||
| BA 75 | |||
| BA 150 (for 150SX15-15, ST150, 240S24) | |||
| BA 150 (for 150SX5, 150SX75, 150SX200) | |||
| The SX-series is standard packed with a H 15 mating connector with faston tabs (included in the price). | |||
| H 15 female connectors | |||
| H 15 with faston tabs | |||
| H 15 with screw connections | |||
| H 15 with solder pins | |||
| S-series | |||
| web | S 6-40 | 0-6 | 40 |
| web | S 15-18 | 0-15 | 18 |
| web | S 28-10 | 0-28 | 10 |
| RA 10 Redundant adapter | |||
| FP 40 Front panel | |||
| FPW Front panel for wall mounting | |||
| 240S, 600S, 1200S series | |||
| web | 240 S 24 (incl. H15 conn., 2 x H155, CL15) 240W | 12-15, 24, 30 | 12, 10, 8 |
| F 16-6 Front panel for Eurorack | |||
| F 19/2 Front panel for horizontal 19" rack mounting incl. 2 handles | |||
| web | 600 S 24 (incl. 2 x H88) 600W | 12-15, 24, 30 | 30, 25, 20 |
| web | 1200 S 24 (incl. 2 x H88) 1200W | 12-15, 24, 30 | 60, 50, 40 |
| web | 1200 S 48 (incl. 2 x H88) 1200W | 24-30, 48, 60 | 30, 25, 20 |
| H88 Bracket | |||
| Handle for H88 | |||
| H114 Bracket | |||
| P111 – Emerson specific | |||
| M-series (linear) | |||
| Half 19" width (excl. 2 x H7 with handle) | |||
| M 15-16 HE | |||
| Full 19" width (incl. 2 x H7 with handle) | |||
| M 48-10 HE | |||
| H 7 with handle | |||
| H 7 with out handle | |||
| web | U-series (linear) | ||
| web | 5 U 5 (PCB mounting) | 5-6 | 1 |
| web | 5 U 5 B (wall, rail mounting) | 5-6 | 1 |
| web | 5 U 15-15 (PCB mounting) | 2 × 12-15 | 0.2 |
| web | 5 U 15-15 B (wall, rail mounting) | 2 × 12-15 | 0.2 |
| web | UCS 50 (current source) | 30 | 50m |
| web | UCS 50 B (current source) | 30 | 50m |
| P 500 (incl. H 15 con tra conn.) | |||
| F 10-3 Front panel for P 500 | |||
| ACCESSORIES | |||
| Alarm Circuits | |||
| web | AL 24-48 (under- and overvoltage alarm) | ||
| Computer Interfaces (external) | |||
| web | PSC 488 EXT (external IEEE and RS 232, incl. accessories) | ||
| web | PSC 232 EXT (external RS 232, incl. accessories) | ||
| web | PSC ETH EXT | ||
| 19" Rack adapters | |||
| RA19-3-PSC for 1 - 3 external PSC's | |||
| RA19-ES-PSC for 1 pc ES and 1 pc PSC | |||
| RA19-3-PSC for 1 - 3 external PSC's | |||
| RA19-ES-PSC for 1 pc ES and 1 pc PSC | |||
| Isolation Amplifiers | |||
| web | ISO AMP MODULE (external module for all SM- and ES-series) | ||
| web | Master / Slave Adapter | ||
| web | Master / Slave Series Adapter (for 2 power supplies, in cluding cable) | ||
| Cables | |||
| Programming connector | |||
| 15 pole D-connector (male) for use on SM- and ES-series | |||
| Master / Slave Parallel cable for two SM- or ES- power supplies | |||
| Power cord for SM1500-series | |||
| straight version, female part | |||
| angular version, female part | |||
| Power Cord Lock SM1500 (to fix cable to unit) | |||
| Power cord for other bench models (not for SM3000, SM6000) |