Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

Teracom TSV100 - AC voltage detector

€49.80 VAT included.
€41.50 VAT excluded. Best price guarantee.
Available for backorder.
MPN: TSV100

TSV100 is an AC voltage detector with optoisolated open collector output. It detects voltage in two ranges – from 85 to 250 VAC (default) and from 170 to 250 VAC. The range is settable by jumper inside the detector. TSV100 utilizes only electronic components, there aren’t any mechanical and electro-mechanical components. This improves detector’s durability.

Reviews (0)

No reviews

Short specification
Manufacturer	Teracom Systems
Ordering code	TSV100

Galvanic isolation is achieved by used optoisolator on the output. The detector is powered by monitored voltage only. The AC voltage detector can be used to indicate the presence or absence of line voltage in uninterruptible power supplies (UPS), power supplies, electrical sources and power lines.

Features

Galvanically isolation between AC line and digital output;
Two AC voltages detection levels, settable by a jumper;
Usable for 115 and 230 VAC networks;
IP30 ingress protection;
Low-temperature drift;
Powered by monitored voltage only.

Applications

Alarm notification for AC network voltage failure;
Industrial automation processes;
AC Voltage monitoring on input of UPS (uninterruptible power supply);
Smart consumption management on battery operation.

Compatible controllers

Ethernet IO module TCW241
Ethernet data logger TCW220
Remote IO module TCW122B-CM
GSM-GPRS remote monitoring controller TCG120
Ethernet digital IO module TCW181B-CM
IP watchdog monitoring module TCW122B-WD
Remote environmental monitoring module TCW112-CM
IP watchdog relay board TCW112-WD

TSV100-UMEN	Download (16) - Manuál EN (Stránka výrobcu)

15 other products in the same category:

Teracom TDI340 - MODBUS S0 pulse counter

Teracom TDI340 - MODBUS S0 pulse counter 2

In stock

Teracom sensors

Teracom TDI340 - MODBUS S0 pulse counter

Teracom Systems

TDI340 is an S0 pulse counter with MODBUS RTU interface. It has 4 isolated digital inputs. The inputs complying with the S0 standard 62053-31. The counter works in polling or edge modes. In the edge mode, it can count on rising, falling, and both edges. In fact, the device has 4 independent counters. Their information is stored in non-volatile memory....

View Product

Teracom TSH202 - 1-Wire temperature and humidity sensor

Teracom TSH202 - 1-Wire temperature and humidity sensor 2

Teracom sensors

Teracom TSH202 - 1-Wire temperature and humidity sensor

Teracom Systems

TSH202 is a 1-Wire humidity and temperature sensor. It provides a low-cost option for humidity and temperature monitoring. The sensor communicates over a 1-Wire bus. Each sensor has a unique 64-bit serial code, which allows multiple sensors to be connected on the same 1-Wire bus. The sensor communicates over a 1-Wire bus. Each sensor has a unique 64-bit...

View Product

Teracom TST200 - 1-wire PT100 transmitter

Teracom TST200 - 1-wire PT100 transmitter 2

Teracom sensors

Teracom TST200 - 1-wire PT100 transmitter

Teracom Systems

TST200 is a Pt100 transmitter with 1-Wire Interface. It is designed to connect Pt100 temperature sensors to TCW2xx and TCG1xx controllers to build temperature monitoring systems in -200 to +850 ° C (-328 to 1560 ° F) range. The 1-Wire Pt100 transmitter incorporates a precision, 24-bit, an analog-to-digital converter (ADC) and further digital signal...

View Product

Teracom TSM400-1-TH - Singlewire temperature and humidity sensor

Teracom TSM400-1-TH - Singlewire temperature and humidity sensor 2

Teracom sensors

Teracom TSM400-1-TH - Singlewire temperature and humidity...

Teracom Systems

TSM400-1-TH is a digital temperature and humidity sensor with a 1-Wire interface. Its construction is designed for wall mounting, making it suitable for monitoring of server rooms, data centers, offices, stores etc.The digital temperature and humidity sensor integrates basic elements as well as signals processing and provides a fully calibrated digital...

View Product

Teracom TSS8030R - smoke detector

Teracom TSS8030R - smoke detector 2

Teracom sensors

Magnetic door sensor TSD800

Teracom Systems

TSD800 is a magnetic door sensor with leads. The robust design makes it an ideal choice for either metal or wooden doors and windows. TSD800 has a relay output and can be used with controllers which have digital inputs in “dry contact” mode.

View Product

Teracom TSM400-4-TH - temperature and humidity sensor with MODBUS RTU (RS-485 interface)

Teracom TSM400-4-TH - temperature and humidity sensor with MODBUS RTU (RS-485 interface) 2

Online only

Teracom sensors

Teracom TSM400-4-TH - temperature and humidity sensor...

Teracom Systems

TSM400-4-TH is a digital humidity and temperature sensor that supports MODBUS RTU protocol over the RS-485 interface. Its construction is suitable for wall mounting, making it a preferred choice for monitoring of server rooms, data centers, offices, stores etc. The digital temperature and humidity sensor integrates basic elements as well as signals...

View Product

Teracom RMK - DIN rail mount kit

Teracom RMK - DIN rail mount kit 2

In stock

Teracom sensors

Teracom TC Monitor-10 - monitoring software for 10 sensors

Teracom Systems

TC Monitor is remote monitoring software that collects data and controls your TCG (GSM) and TCW (Ethernet) IO modules. The application is easy to install and allows you to set up a monitoring system for a few minutes. The supported devices can operate in server or client mode, making it possible to add controllers installed in different locations.The...

View Product

Teracom TSV200 - 1-wire DC voltage transmitter

Teracom TSV200 - 1-wire DC voltage transmitter 2

Teracom sensors

Teracom TSV200 - 1-wire DC voltage transmitter

Teracom Systems

TSV200 is 1-Wire voltage sensor with digital output and galvanic isolated input. It provides a low-cost option for DC voltage monitoring. Embedded digital signal processing in multiprocessors system provides a calibrated digital output with 10-bit resolution. The sensor can is suitable for power measurements of telco systems (-48VDC standard), solar...

View Product

Teracom TSA200 - 1-wire current loop transmitter

Teracom TSA200 - 1-wire current loop transmitter 2

Teracom sensors

Teracom TSA200 - 1-wire current loop transmitter

Teracom Systems

TSA200 is 1-Wire current loop transmitter with 0-20mA/4-20mA input range. The current loop input is galvanically isolated from the interface. The device communicates over a 1-Wire bus. Each sensor has a unique 64-bit serial code. This allows multiple sensors to be connected on the same 1-Wire bus. The 1-Wire current loop transmitter TSA200 has two RJ11...

View Product

Teracom SPL2-RJ11 - RJ11 splitter

Electricity

Teracom SPL2-RJ11 - RJ11 splitter

Teracom Systems

RJ11 splitter

View Product

Teracom TSL200 - 1-wire ambient light transmitter

Teracom TSL200 - 1-wire ambient light transmitter 2

Teracom sensors

Teracom TSL200 - 1-wire ambient light transmitter

Teracom Systems

TSL200 is a 1-Wire ambient light sensor with high dynamic range and resolution. The dynamic range of 83000 lux guaranties precise measurements even directly to the light sources. The sensor measures the intensity of the visible light. It has a strong infrared (IR) rejection. This makes the spectral response of the sensor very close to the response of the...

View Product

Teracom TSS8030R - smoke detector

Teracom sensors

Teracom TSS8030R - smoke detector

Teracom Systems

TSS8030R is a smoke detector, designed for early warning of a fire condition. It responds to fixed threshold smoke concentration detected in the protected rooms. The principle of functioning of the detector is based on infrared rays distraction caused by smoke particles entering the optic chamber. The smoke sensitivity is factory preset.

View Product

Teracom TSM400-4-CPTH - temperature, humidity and CO2 sensor (Modbus RTU)

Teracom TSM400-4-CPTH - temperature, humidity and CO2 sensor (Modbus RTU) 2

Teracom sensors

Teracom TSM400-4-CPTH - temperature, humidity and CO2...

Teracom Systems

CO2 (Carbon dioxide) is a colourless and odourless gas. It is the fourth most present gas in the Earth’s atmosphere. Its concentration, especially indoors, is important for the health and efficiency of the people in them. TSM400-4-CPTH is a multi-sensor that supports MODBUS RTU protocol over the RS-485 interface. The sensor measures CO2 concentration,...

View Product

Teracom TSH230 - IP54 waterproof temperature and humidity sensor

Teracom TSH230 - IP54 waterproof temperature and humidity sensor 2

Teracom sensors

Teracom TSH230 - IP54 waterproof temperature and humidity...

Teracom Systems

TSH230 is a waterproof temperature and humidity sensor with a 1-Wire interface. A unique capacitive element is used for measuring relative humidity while the temperature is measured by a bandgap element. Both elements are seamlessly coupled to a 12-bit analog to digital converter, which results in superior measurement quality. Used with one of Teracom...

View Product

Teracom RMK - DIN rail mount kit

Teracom sensors

Teracom RMK - DIN rail mount kit

Teracom Systems

Teracom rack mount kit for mounting sensors or modules to DIN rails.

View Product

Need help?

Do you need help with choosing the right product for your needs? Contact us on elso@elso.sk.

Quick links

Elso

Product added to compare.

Webové stránky spoločnosti Elso Philips Service používajú súbory cookies na svoju správnu funkciu a pre zabezpečenie lepších služieb pre Vás.