~Nedodávané a ukončená výroba

Fluke 5500A - Multikalibrátor

Fluke 5500A - Multikalibrátor

Calibration solutions that match your workload and budget

The 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples and RTDs. The 5500A"s Oscilloscope Calibration options provide level sine wave, fast edge, time mark and amplitude signals for calibration of oscilloscopes up to 600 MHz.

More details

Dostupnosť: Nedostupné

The 5500A was designed to cover a very wide range of medium accuracy electrical measurement devices including:

  • Handheld and bench multimeters
  • Oscilloscopes and ScopeMeter® Test Tools
  • Wattmeters
  • Analog volt/ohm/amp/watt instruments
  • Electronic thermometers
  • Data loggers
  • Strip chart recorders
  • XY Recorders
  • Power harmonics analyzers
  • Process calibrators
  • Current clamps
  • And related instruments
Flexibility, accuracy and value

Compared to more traditional calibrators designed to calibrate a certain type of instrument, the 5500A sets the standard of a whole new class of multi-product calibrator covering an unprecedented range of dc and low frequency electrical calibration workload. When you team it with the optional 5500/CAL Calibration Software, the 5500A offers a complete, powerful and flexible solution for calibration documentation and reporting according to today"s quality standards like ISO 9000.

The standard Fluke 5500A Multi-Product Calibrator can calibrate digital and analog multimeters, thermometers (thermocouple and RTD) handheld wattmeters, data loggers, current clamps, various types of recorders, panel meters, process calibrators, power harmonics analyzers and many other similar measurement tools.

The 5500A"s Oscilloscope Calibration options further extend coverage to the most widely used analog and digital oscilloscopes. These options can be included at time of purchase, or added later at any authorized service center.

The 5500A includes all the traditional meter calibration source functions - voltage, current and resistance. Plus it adds capacitance, and both resistance and capacitance are continuously variable with resolution down to 1 milliohm or 0.1 pF. Both are easy and practical to use with a wide variety of measurement tools.

Power is simulated using dual dc or ac outputs, allowing you to source two voltages or voltage plus current at the same time with precise phase control for wattmeter or power harmonics analyzer calibration. And the 5500A simulates a wide range of thermocouples and RTDs for temperature calibration.

For all its capabilities, the 5500A is remarkably affordable. For about the same price you would expect to pay for a calibrator for one type of instrument, the 5500A can provide you with far more, making cost justification easy. And when you consider how your workload might change in the future, the 5500A is an even better value. So instead of buying several standards, the 5500A meets your needs with a single, compact tool.

The 5500A also features the stability, linearity and low noise performance common to all Fluke calibrators. Each unit is shipped with test data and a certificate of traceability to nationally recognized standards.

Compliance with quality standards made easy

With quality control standards such as ISO 9000, there is a lot more to calibration than just making measurements. You also have documentation, control and reporting requirements to meet.

Our optional Microsoft Windows®-based 5500/CAL simplifies the documentation of your procedures, adequacy and traceability as required by ISO 9000 and other similar quality standards. It also collects and reports calibration results information and helps consistently, quickly and efficiently calibrate a wide variety of instruments. 5500/CAL is a special version of our MET/CAL® Plus Calibration Software Package designed to work with the 5500A and a Fluke 45 DMM. Because it controls instruments via an RS 232 (serial port), no IEEE interfaces are required. That means that with a 5500A, a notebook computer and 5500/CAL, your whole calibration process can be automated, from creation of procedures to execution through results data collection and reporting. Thousands of procedures are included. They can be run as is, edited to fit your specific needs, or used as the basis to create new procedures.

Operation is easy

With the 5500A, we took great care to make the calibrator as easy as possible to use. For almost everything you do with the 5500A, your hand moves naturally from left to right. Values are entered from the calculator-style keyboard. Values can be stepped up and down in even decades (1-2-5 sequence in scope mode) with the multiply and divide keys. Specifications for any value can be viewed with the push of a button.

The 5500A"s display is rugged, bright and easy to read from all angles. Output and information is clearly displayed so instrument status can be determined easily at a glance.

Calibration Instruments   >   DC/LF Electrical Calibration   >   Calibrators   >  
5500A Multi-Product Calibrator
Technical Specifications
Voltage DC
Range:0 to ±1020V
Best 1 Year Specification:±50 ppm of setting
Current DC
Range:0 to ±11A
Best 1 Year Specification:±0.01% of setting
Range:0 to 3.29.999 MΩ
Best 1 Year Specification:±0.009% of setting
Voltage AC
Range:1 mV to 1020V
 10 Hz to 500 kHz, Sine
Best 1 Year Specification:±0.03% of setting
Current AC
Range:29 m A to 11A
 10 Hz to 10 kHz, Sine
Best 1 Year Specification:±0.06% of setting
Range:0.33 nF to 1.1 mF
Best 1 Year Specification:±0.25% of setting
Thermocouple Source and Measure
Range:-250°C to +2316°C (11 types)
Best 1 Year Specification:± 0.14°C of setting
RTD Source
Range:-200°C to +630°C
 (8 types)
Best 1 Year Specification:±0.03°C of setting
DC Power
Range:109 m W to 11 kW
Best 1 Year Specification:± 0.08% of setting
AC Power
Range:109 m W to 11 kW
 45-65 Hz, PF=1
Best 1 Year Specification:± 0.15% of setting
Range:0 to ± 179.99°
Best 1 Year Specification:±25 ppm of setting
Range:0.01 Hz to 2.0 MHz
Best 1 Year Specification:±25 ppm of setting
General Specifications
Warm up Time
 Twice the time since last warmed up, to a maximum of 30 minutes
Settling Time
 Less than 5 seconds for all functions and ranges except as noted
Standard Interfaces
 IEEE-488 (GPIB), RS-232, 5725A (5500A only)
Temperature Performance
Operating:0°C to 50°C
Calibration:(tcal): 15°C to 35°C
Storage:-20°C to 70°C
Temperature Coefficient
 Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C
Relative Humidity
Operating:< 80% to 30°C, < 70% to 40°C, < 40% to 50°C
Storage:< 95%, non-condensing
Operating:3,050m (10,000 ft) maximum
Non-operating:12,200m (40,000 ft) maximum
 Designed to comply with IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994; CAN/CSA-C22.2 No. 1010.1-92
Analog Low Isolation
 Designed to comply with FCC Rules Part 15
Line Power
Line Voltage (selectable):100V, 120V, 220V, 240V
Line Frequency:47 to 63 Hz
Line Voltage Variation:: ± 10% about line voltage setting
Power Consumption
 300 VA
Height:17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit
Width:43.2 cm (17 in), standard rack width
Depth:47.3 cm (18.6 in) overall
Weight (without options)
 20 kg (44 lbs.)
Absolute Uncertainty Definition
 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated.
Specification Confidence Interval


30 Ďalších produktov v rovnakej kategórii

Porovnať 0