PM 6303A/01 RCL Meter (1kHz)
| Technical Specifications |
| AC test mode |
| Test frequency: |
1 kHz |
| Test frequency accuracy: |
0.025% |
| Test signal level: |
2V via 400Ω source |
| Basic measurement accuracy: |
0.25% ± 1 digit |
|
| DC bias |
|
| Maximum measurement ranges |
| Impedance/Resistance Z or RAC: |
0.000Ω to 200 MΩ |
| Capacitance C: |
0.0 pF to 100 mF |
| Inductance L: |
0.0 mH to 32 kH |
| Quality factor Q: |
: 0.0002 to 500 |
| Dissipation factor D: |
0.002 to 500 |
| Phase angle F: |
-90.0 to +90.0 deg |
|
| Maximum resolution |
| Impedance/Resistance Z or RAC: |
01 MΩ |
| Capacitance C: |
0.1 pF |
| Inductance L: |
0.1 mH |
| Quality factor Q: |
0.001 |
| Dissipation factor D: |
0.001 |
| Phase angle F: |
0.1 deg |
|
| Circuit diagram |
| |
7 different equivalent circuit diagrams |
|
| Auto mode |
| Read-out: |
Dominant parameter |
| Equivalent circuit diagram: |
Parallel for R+C |
| |
Serial for R+L |
|
| Manual Mode |
| Read-out: |
Dominant or secondary parameter |
| Equivalent circuit diagram: |
Parallel or serial selectable |
|
| Measurement update rate |
|
| Trim function |
| Open circuit: |
Open circuit compensation |
| |
Z > 100 kΩ |
| Short circuit: |
Short circuit compensation |
| |
Z < 10Ω |
|
| Stored settings (non-volatile memory) |
| Front panel settings: |
1 (trim figures included) |
|
| Calibration Interval |
|
| Environmental Conditions |
| Operating temperature: |
0°C to 50°C |
| Storage temperature: |
-40°C to 70°C |
| Power requirements: |
100/120/220/240V ± 10% |
| Line frequency: |
50 to 100 Hz |
| Power consumption: |
16 VA |
| Safety: |
According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2 |
| EMC: |
According to CE regulation 89/336: Emission according to EN 55011, Group 1 Class B, respectively CISPR 11. Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4 |
| Warm-up time: |
5 minutes |
|
| Dimensions and weight |
| W x H x D: |
315 x 105 x 401 mm (12.4 in x 4.13 in x 15.9 in) |
| Weight: |
3.8 kg (8.4 lb) |
|
|
|
 |
|
