~Nedodávané a ukončená výroba

Fluke BM. QA-90 MKII - Electrical Safety Analyzer

Fluke BM. QA-90 MKII - Electrical Safety Analyzer

The QA-90 represents a new generation of safety testing equipment. QA-90 is the only automatic safety tester that can test Instruments containing modules with different classes of protection in one test run (i.e. CF and BF defibrillators). It is simple to use. All you need to do is select the type and class of the equipment to be tested. When you press START, the QA-90 will execute the tests prescribed in the selected standard. The test result can either be printed out immediately or stored internally in the unit for later use. The QA-90 can be fully remotely controlled via ansur software. With ansur, you can make your own test protocols, store the information on disk and export formatted data to equipment management databases

More details

Dostupnosť: Nedostupné
 
Informácie
  • Small size - easy to carry
  • Can operate completely standalone or by remote control with the ansur software
  • Tests instruments containing modules with different protection classes in one test run i.e. CF and BF (defibrillator)
  • Tests module separation
  • Residual current measurements (optional)
  • 11 patient inputs (laboratory style)
  • Test according to: IEC 60601.1, IEC 60601.1.1, IEC 60601.2.4, IEC 61010, VDE 751-1:1990, VDE 751-1: 2001, UL 2601.1, AS 3200.1, DB 9801, HEI 95, AAMI.
  • Testing against standard or user defined limits
  • Automatic, stepwise and manual test modes
  • Programmable power up delay time before measurements
  • Integrated keypad
  • Internal memory for uploading test sequences and storing typically up to 200 equipment test results
  • Built-in standard A4 protocols for on site documentation (localised)
  • RS-232, Centronics and Bar code interface
Biomedical Test   >   Electrical Safety Analyzers   >  
QA-90 MKII Electrical Safety Analyzer
Specifications
Test Sequence
 Individual test sequences may be compiled to satisfy national and international standards: IEC 60601.1, VDE 0750 T1/12-91, BS 5724, UL 2601.1, CAN/CSA-C22.2 No 601.1-M90, AS 3200.1, NZS 6150:1990, VDE 0751:1990, VDE 0751:2001, IEC 60601.1.1, IEC 60601.2.4, UL 544, HEI 95, DB9801 and more
Voltage Measurement
The voltage measurement may be executed in the following ways– Between lead 1 and 2
 – Between lead 1 and Earth
 – Between lead 2 and Earth
 – Between input/output E+ and E- (floating inputs/outputs)
Range:0 V to 400 V true RMS
Resolution:0.1 V
Accuracy:DC-100 Hz 1 % of full scale ± 1 LSD
100 Hz-1 kHz 2 % of scale ± 1 LSD
No. of Tests:4 or multiple
Current Consumption
 The current measurement may be executed in lead no. 1 (live)
Range 1:0 mA to 1000 mA true RMS (@ < 250 V ac)
  Resolution: 1 mA
  Accuracy: ± 2 % of full scale ± 1 LSD
  No. of Tests: 1 or multiple
Range 2:1 A to 16 A true RMS (@ < 250 V ac)
  Resolution: 1 mA
  Accuracy: ± 1 % of full scale ± 1 LSD
  No. of Tests: 1 or multiple
Protective Earth
 The test current is 25 A or 1 A, delivered from a transformer with a maximum idle voltage of 6 V. The measurement can be performed on ground leads or between E+ and E- (floating inputs/outputs)
Range:0 Mohm to 2000 Mohm
Resolution:1 Mohm
Accuracy:± 2 % of full scale or 5 % of reading
No. of Tests:1, 2, or multiple
Insulating Resistance
 The measurement of the insulating resistance may be executed between casing and power unit, or between patient module and power unit
Test voltage:500 V dc through a 130 kohm limiting resistor
No. of Tests:1, 2, or multiple.
Range 1:1 Mohm to 50 Mohm
  Resolution: 1 Mohm
  Accuracy: ± 2 % of full scale ± 1 LSD
Range 2:5 Mohm to 200 Mohm
  Resolution: 1 Mohm
  Accuracy: ± 2 % of full scale ± 1 LSD
Leakage Currents
 All measurements can be performed with a IEC 601.1 filter (patient equivalent), or without (flat frequency response). The filter can be exchanged with filters covering other standards. All measurements can be performed as true RMS measurements, or AC/DC measurements.
 The following leakage currents are measured, No. of Tests:
 Earth leakage current, 4
 Enclosure leakage current, 6 or multiple
 Residual current, 2
 Substitute equipment current, 1
 Direct current, 2
 Current Fig. 9, 1
 The following leakage currents are measured for each module, No. of Tests:
 Patient leakage current, 6
 Mains on applied part leakage current, 2
 Patient Auxiliary current, 6
 Floating dual lead measurement of leakage currents, Multiple
 Substitute patient current, 1
 In one test run a maximum of 11 modules with different protection classes may be tested
Accuracy
Range 1:0 to 99.9 µA
  Resolution: 0.1 μA
  Accuracy: ± 2 % of full scale ± 1 LSD
Range 2:100 µ to 1000 µA
  Resolution: 1 μA
  Accuracy: ± 2 % of full scale ± 1 LSD
Range 3:1.0 mA to 10.0 mA
  Resolution: 1 μA
  Accuracy: ± 1 % of full scale ± 1 LSD
Frequency Response
 Dc to 1 MHz (-3 dB) with a Crest factor: > 2
 The test voltage for the mains on applied part measurement is 110% of the line voltage, delivered through a limiting resistor of 47 kohm
Ansur Software offers the following features
Remote Control
 All functions and tests in QA-90 may be performed from the PC
User-Definition of Test Standards
 Select predefined standards or create your own local/new standard with test limits
User-Programmable Test Sequences
 Allows user-defined test sequences with a selection of tests from the selected test standard
Customized Protocols
 Create your own protocol format including a header, checklist, job instructions, a command field and a test sequence
Storage and Recall
 Protocol formats and data may be stored, recalled, printed out, or transferred to D-base systems
General Information
Temperature Requirements
+ 15 °C to +35 °CWhile operating
0 °C to +50 °CFor storage
Display
Type:LCD
Alphanumeric Format::4 lines by 40 characters
Display Control:7 F-keys and a keypad
Data Input/Outputs (2)
 Parallel printer port (1); bi-directional
 RS-232 (1) for computer control
 Bar code interface
Power
 From 100 V ac to 240 V ac, 47/63 Hz
Housing
 Metal case
Dimensions (LxWxH)
 305 mm x 342 mm x 132 mm
Weight
 5.8 kg
Recommended Printers:
 HP Desk Jet, Canon Bubble Jet or compatible

Príslušenstvo

30 Ďalších produktov v rovnakej kategórii

Porovnať 0