~Nedodávané a ukončená výroba

Štítky

GMC SI232-II

GMC SI232-II

Hardware and software modification

This upgrade allows you to use the old SI 232 memory adapter with our new METRAHit 2... multimeter generation with expanded options.

METRAHit 1xS and 2xS/M instruments can be operated
together in memory mode with the new SI232-II adapter.
Stored data can then be read out with the help of METRAwin10 software (as of version 4.26).

Questions and Answers:

Can the SI232-II be coupled with the old SI232?
YES, although this is not advisable because both then function with the 1X protocol only. => Upgrade is possible

Can the METRAHit 12S (and other instruments) be used in combination with the SI232-II?
YES, without restriction

Can the BD232 be linked to the SI232-II?
YES, without restriction

Can the METRAHit 18S be coupled with the METRAHit 26S/M (and other instruments)?
YES, without restriction

Differences between the SI 232 and SI232-II Memory Adapters

Like the BD232, the SI232-II is equipped with a bi-directional IR interface.
All METRAHit 2X instruments can thus be controlled with a PC, as is also possible with the BD232 adapter.

Additional Menu Functions

Rate: dataOnly those measured values are saved to memory which have been acquired with the multimeter"s "Data" function.
Hyst: AllAll measured values from the multimeter are saved to memory.
Same as Hit 22M, 26M, 29S
Trig: outRecording is triggered if at least one measured value is within the Lo and Hi limits, and if one of the subsequent values exceeds or falls below the limit values.
Same as Hit 22M, 26M, 29S
Trig: InRecording is triggered if at least one measured value is outside the Lo and Hi limits, and if one of the subsequent values exceeds or falls below the limit values.
Same as Hit 22M, 26M, 29S
Trig: St-InOnly those measured values are saved which lie within the Lo and Hi limit values.
Same as Hit 22M, 26M, 29S
Trig: St-outOnly those measured values are saved which violate the Lo and Hi limit values.
Same as Hit 22M, 26M, 29S
REtri: on/offRe-trigger, multiple measured value acquisition after trigger event
Same as Hit 22M, 26M, 29S
Addr: ModemMakes allowance for a modem between the adapter and the PC.
Same as Hit 22M, 26M, 29S

The upgrade package includes the above listed functions and new operating instructions.

More details

Dostupnosť: Nedostupné
 
Informácie

Príslušenstvo

    30 Ďalších produktov v rovnakej kategórii

    Porovnať 0