Command line configurator and commander for a Power Supply from Delta Elektronika BV is CLI tool designed to configure, check communication and control an power supply connected to Ethernet. Program is working under Linux and MS Windows.
Explore LAN and show connected PSU's
Easy configure IP address of the PSU
Send basic SCPI commands to PSU
Reads response from the PSU
Can be used in batch files and scripts to automatize tasks
Command line help: Command line configurator for Delta Elektronika PSU's by www.Elso.sk v0.9.6 W32 When no parameter is specified, program searches for PSU's on Local Network. Commands are case insensitive. Use Slash (/) or Minus (-) as parameter switch. /h, /? - this text /b - Bind to all local adresses, use when you have more than one NIC. /l - Long search, waits longer time for response from PSU's. /f - Fast search, waits shorter time. /r - send controller Reset command, /MAC is mandatory. /mac - specify MAC Address of PSU as next parameter. use: /mac F4-e1-42-00-03-ab /dhcp - enable DHCP on PSU with specified MAC Address, /MAC is mandatory. /static - set static IP address on PSU with specified MAC Address paramters /IP and /MAC are mandatory. /ip - specify IP Address as next parameter. use: /mac F4-e1-42-00-03-ab /static /ip 192.168.2.2 /gw - specify address of Default Gateway as next parameter. If not spefified, is calculated from /IP, x.x.x.1 /mask - specify Network Mask as next parameter. If not spefified, default is used 255.255.255.0 /bad - specify IP Address to Bind to. /a - ask for IDN and interfaces /cmd - send command to PSU, use: /IP 10.0.0.1 /cmd "sour:curr 3;outp 1" /cfl - send text file, empty line is pause, use: /IP 10.0.0.1 /cfl file.txt