Fluke Networks FTK400 - Sada na kompletnú verifikáciu optickej kabeláže

Pre tento produkt nebola stanovená cena. Vyžiadajte si cenovú ponuku.
Na centrálnom sklade. Doručenie do 5-10 pracovných dní.
MPN:

Kontaktujte nás

FTK 400

Táto sada je určená pre tých, ktorí inštalujú a spravujú siete s multimódovym aj single módovym optickým vláknom. Umožňuje overovať optickú stratu a výkon na 850nm, 1300nm, 1310nm a 1550nm. Sada SimpliFiber FTK400 dovoľuje kontrolovať zakončenie vlákien pri 200× zväčšení vďaka optickému mikroskopu handheld Fiber Viewer a vizuálne lokalizovať chyby na kabeláži, problémy s konektormi a s polaritou pomocou VisiFault.

Recenzie

Žiadne recenzie

Krátka špecifikácia
Výrobca	Fluke
Objednávkový kód	-

Sada na kompletnú verifikáciu optickej kabeláže

SimpliFiber Power Meter & Sources General Specifications
Temperature range, operating	0 to +45 C
Temperature range, storage	-20 to +60 C
Humidity range, operating	10 to 95% RH, non-condensing
Humidity range, storage	0 to 95% RH, non-condensing
Certifications	CE, CSA
Dimensions	15.3 x 8.9 x 3.2 cm (6.0 x 3.5 x 1.3in)
Weight	0.18kg (0.4 lb)

SimpliFiber Optical Sources
Connector	ST or SC (varies by model)
Emitter Type	850/1300 Source: LEDs 1310 Source: laser 1550 Source: laser
Emitter wavelengths	850/1300 Source: 850 nm and 1300 nm 1310 Source: 1310 nm 1550 Source: 1550 nm
Power Output (min)	850/1300 Source: -20dBm 1310 Source: -10 dBm 1550 Source: -10 dBm
Power Output Stability (8 hours)	+/-0.25 dB at 23C
Battery life (2 replaceable AA alkaline batteries)	850/1300 Source: 10 -50 hours typical 1310 Source: 20 -100 hours typical 1550 Source: 20 -100 hours typical

SimpliFiber Optical Power Meter
Connector	Interchangeable Connector Adapter: ST, SC, FC, universal - or SC (varies by model)
Detector Type	Germanium
Calibrated wavelengths	850 nm, 1300 nm, 1310 nm, 1550 nm
Power measurement range	+3 to -55 dBm
Battery life (2 replaceable AA alkaline batteries)	250 hours typical
Memory	100 results
Serial Port	RS-232, D89

VisiFault Visual Fault Locator Specifications
Optical
Fiber compatibility	Multimode and Singlemode
Wavelength	650nm (visible wavelength)
Laser safety rating	Class II
Output power	0mW max
Output modes	Continuous (steady) and flashing (2-3Hz pulsed)
Range	3 km multimode, 4 km singlemode

Environmental and mechanical
Operating temperature	0 °C to 40 °C
Storage temperature	-20 °C to 60 °C
Relative humidity	95% (10 to 35 °C)
Vibration	Random, 2g, 5-500 Hz
Shock	1m drop onto all corners and face
Altitude	3000m

General
Dimensions	157 x 52 x 37 mm (6.2 x 2.0 x 1.3 inch)
Weight (including batteries)	0.18 kg (5.7 oz)
Adapter	2.5mm universal
Adapter cap	Tethered protective end cap
Controls	On/off, continuous/flashing
Battery type	2 x AA
Battery life	> 80 hours in continuous mode
Safety	CSA C22.2 No. 1010.1 1992, EN 61010-1, CE
Carrying Case	Soft sided with belt loop

FiberInspector Mini Specifications
Magnification	200X
Camera type	0.33 in (8.38 mm) CMOS sensor
Light source	LED, >100,000 hr life
Lighting technique	Coaxial
Dimensions	5.5 in x 1.8 in x 1.7 in (140 mm x 46 mm x 44 mm) (length depends on adapter tip)

FT120 Fiber Viewer Specifications
Magnification	FT120: 200X
Fiber Adapter	Three 1.5V AAA batteries (NEDA 24A or IEC LR03) 35 hours typical use with alkaline batteries
Power Supplly	LED
Light Source	White LED (1,000,000 hour life)

Optical Laser Safety Filter
Specification	850 nm	Wavelength 1310nm	1550nm
Optical Density	2.05	5.10	4.30
Attenuation	20.5 dB	51.0 dB	43.0 dB
Peak Power Rating*	49mW	1000W	190W