Hart Scientific 2063 - Screw bases

Hart Scientific 2063 - Screw bases

Cena pre tento produkt nieje dostupná. Kontaktujte nás.
Na objednávku, termín doručenia bude upresnený.
MPN: 1649847

Spýtajte sa na cenu

Cena produktu nebola stanovená, vyžiadajte si cenovú ponuku.

Mechanical support for probes
When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid. We recommend our modular mechanical support systems. Made of fine-quality steel and machined parts, these support components combine in hundreds of ways to solve almost any probe suspension problem.

Single probe kit
Our single probe kit is a good way to get started. It has one medium clamp, one 10-inch rod, one bosshead, and one V-base for holding one probe.

Recenzie (0)

Žiadne recenzie

Krátka špecifikácia
Výrobca	Fluke Calibration
Objednávkový kód	1649847

Our economy kit includes two V-bases, one 29-inch stainless steel rod, two 23-inch rods, five bossheads, two micro-clamps, and one medium clamp. This will build a bench-mounted frame for suspending one rod and three clamps over a bath opening. Simply add to your setup as needed. Choose from any of the listed accessories.

Individual hardware
Our selection of clamps and stands provides a simple way to hold probes and thermometers in baths during calibration. System components can be assembled in a number of ways to suit individual needs. Select clamps, rods, bossheads, and bases to fit your individual needs.

15 ďalších produktov v rovnakej kategórii:

Hart Scientific 2058 - Stainless steel rods 10"

Kalibračné vaničky

Hart Scientific 2058 - Stainless steel rods 10"

Fluke Calibration

Mechanical support for probes When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid. We recommend our modular mechanical support systems. Made of fine-quality steel and machined parts, these support components combine in hundreds of ways to solve almost any probe suspension problem. Single probe...

Zobraziť

Hart Scientific 2062 - Bossheads

Kalibračné vaničky

Hart Scientific 2062 - Bossheads

Fluke Calibration

Mechanical support for probes When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid. We recommend our modular mechanical support systems. Made of fine-quality steel and machined parts, these support components combine in hundreds of ways to solve almost any probe suspension problem. Single probe...

Zobraziť

Fluke 7009 - veľkoobjemová, odporová vaňa

Kalibračné vaničky

Hart Scientific 7009 - Resistor Bath, high capacity

Fluke Calibration

Three size options for any quantity of resistors Stability to ±0.0007 °C Independent high- and low-temperature cutout circuit Minimal long-term drift

Zobraziť

Fluke 7109A-P Prenosná kalibračná vanička s procesnou elektronikou

Fluke 7109A-P Prenosná kalibračná vanička s procesnou elektronikou 2

Kalibračné vaničky

Fluke 7109A-P Prenosná kalibračná vanička s procesnou...

Fluke Calibration

Tieto dva modely „vaní“ pokrývajú široký rozsah teplôt: +35 °C až 250 °C pre Fluke 6109A a -25 °C až +140 °C pre 7109A. Každý model ponúka „-P“ verziu, ktorá obsahuje procesnú elektroniku pre pripojenie externej referenčnej sondy.

Zobraziť

Fluke 7102 - mikrovanička (–5 °C až 125 °C)

Kalibračné vaničky

Hart Scientific 7102 - Micro-Bath (–5 °C to 125 °C)

Fluke Calibration

World’s smallest portable calibration baths Calibrates sensors of any size or shape Stability to ±0.015 °C Ranges from –30 °C to 200 °C

Zobraziť

Fluke 2051 - držiak na sondu

Kalibračné vaničky

Hart Scientific 2051 - Single probe kit

Fluke Calibration

Mechanical support for probes When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid. We recommend our modular mechanical support systems. Made of fine-quality steel and machined parts, these support components combine in hundreds of ways to solve almost any probe suspension problem. Single probe kit...

Zobraziť

Fluke 7080 - kalibračná vaňa (–80 °C až 110 °C)

Kalibračné vaničky

Hart Scientific 7080 - Standard Bath (–80 °C to 110 °C)

Fluke Calibration

Self-contained refrigeration—no LN2 or chiller required Temperatures as low as –100 °C in real metrology baths Best stability and uniformity available at –60 °C and below Large working areas for increased throughput

Zobraziť

Hart Scientific 2061 - Stainless steel rods 29"

Kalibračné vaničky

Hart Scientific 2061 - Stainless steel rods 29"

Fluke Calibration

Mechanical support for probes When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid. We recommend our modular mechanical support systems. Made of fine-quality steel and machined parts, these support components combine in hundreds of ways to solve almost any probe suspension problem. Single probe...

Zobraziť

Fluke 6055 - vysokoteplotná hlboká vaňa

Kalibračné vaničky

Hart Scientific 6055 - Hi-Temp Deep-Well Bath

Fluke Calibration

Constant liquid levels through concentric-tube design Special design for sighting LIG thermometers Depth up to 60 cm (24 in) Optional interface packages control all settings

Zobraziť

Fluke 6109A-P Prenosná kalibračná vanička s procesnou elektronikou

Fluke 6109A-P Prenosná kalibračná vanička s procesnou elektronikou 2

Kalibračné vaničky

Fluke 6109A-P Prenosná kalibračná vanička s procesnou...

Fluke Calibration

Fluke Calibration 6109A a 7109A – prenosné kalibráčné kúpele (vaničky) dokážu profesionálne kalibrovať štyrikrát viac sanitárnych snímačov na dávky v kratšom čase a s dvojnásobnou presnosťou ako iné kúpele v tejto triede. Až štyri tri-clamp sanitárne snímače sa ľahko vôjdu do týchto kúpelov pre kalibráciu na ± 0.1 °C presnosti zobrazenia....

Zobraziť

Fluke 9230 - vanička pre udržanie t. b. gália (15 °C až 35 °C )

Kalibračné vaničky

Fluke Calibration 9230 - pec pre realizáciu trojného bodu...

Fluke Calibration

Bod topenia gália (29,7646°C) je dôležitá teplota. Tento referenčný bod je dôležitý pri kalibrácii teplomerov v biologických laboratóriach, monitorovaní životného prostredia a mnohých ďalších, dôležitých aplikáciach. Laboratórne normy sa naň spoliehajú ako na kontrolný štandard pre ITS-90, no taktiež ako prostriedok pri meraní dlhodobej tendencie medzi...

Zobraziť

Hart Scientific 2065 - Large V-base

Kalibračné vaničky

Hart Scientific 2065 - Large V-base

Fluke Calibration

Mechanical support for probes When setting up a new calibration bath, you need a way to suspend your probes in the bath fluid. We recommend our modular mechanical support systems. Made of fine-quality steel and machined parts, these support components combine in hundreds of ways to solve almost any probe suspension problem. Single probe...

Zobraziť

Fluke 9210 - malá vanička pre udržanie t. b. vody (–10 °C až 125 °C )

Kalibračné vaničky

Hart Scientific 9210 - Mini TPW Maintenance Apparatus...

Fluke Calibration

Easy preprogrammed realization Inexpensive fixed-point solution Training takes a few hours

Zobraziť

Fluke 6020 - kalibračná vaňa (40°C až 300°C)

Fluke 6020 - kalibračná vaňa (40°C až 300°C) 2

Kalibračné vaničky

Hart Scientific 6020 - Standard Bath (40°C to 300°C)

Fluke Calibration

Large-capacity tanks for higher productivity Calibrations up to 300 °C Built-in cooling coils for faster cooling Stability to ±0.001 °C

Zobraziť

Fluke 6331 - hlboká, kompaktná vanička (40 °C až 300 °C)

Kalibračné vaničky

Hart Scientific 6331 - Deep-Well Compact Bath (40 °C to...

Fluke Calibration

457 mm (18 in) of depth with just 15.9 liters (4.2 gal) of fluid Perfect for liquid-in-glass thermometers with optional LIG kit Fast, quiet, compact (yet deep!), and economical

Zobraziť

Sme tu pre Vás

Potrebujete pomôcť s výberom? Sme tu pre Vás každý pracovný deň od 8:00 do 16:00 na telefónnom čísle +421 32 658 2410 alebo emailovej adrese elso@elso.sk.

Rýchle odkazy

Kalibrácia teploty a vlhkosti

Tento produkt bol pridaný do porovnávacej tabuľky.

Webové stránky spoločnosti Elso Philips Service používajú súbory cookies na svoju správnu funkciu a pre zabezpečenie lepších služieb pre Vás.