copy of Elma EVSE-200 type 2 EV

Elma EVSE-200 activates the charging point (EVSE), by simulating the connection of an electric vehicle (EV). Furthermore it provides the measuring points to standard banana sockets. The adapter itself can then perform a simple functional test, if charge point is activated, and full installatino test can be performed with any installation tester MFT, as the Elma EVSE-200 is universal.

Furthermore the EVSE-200 provides seve

Elma EVSE-200 activates the charging point (EVSE), by simulating the connection of an electric vehicle (EV). Furthermore it provides the measuring points to standard banana sockets. The adapter itself can then perform a simple functional test, if charge point is activated, and full installatino test can be performed with any installation tester MFT, as the Elma EVSE-200 is universal.

Furthermore the EVSE-200 provides several other clever functions:

CP signal to bananaplugs. EVSE and EV communicates throug Hz% modulated 1kHz square pulse signal. This signal can be read out throug the standard banana sockets in the adapter.

Elma EVSE-200 can also be connected to a load, like an electric heater, and carry a load of 10A, from the Schuko socket in the adapter. Thus the chrange point can be put under load for testing and trouble shooting, e.g.  by one of our infrared cameras.

Elma EVSE-200 can also simulate faults, lige missing PE, CP-PE short etc. to test functions in the charger like auto reset.

The adapter is ready to use in nylon carry bag, including type 2 plug, simple turn-knob setting for PP (Load request) and CP (connection status) for ventilated (ABD) and un-ventilatet (ABC) chargers. The adapter is universal and can be used with any installation testers or any other electrical tester.

ral other clever functions:

CP signal to bananaplugs. EVSE and EV communicates throug Hz% modulated 1kHz square pulse signal. This signal can be read out throug the standard banana sockets in the adapter.

Elma EVSE-200 can also be connected to a load, like an electric heater, and carry a load of 10A, from the Schuko socket in the adapter. Thus the chrange point can be put under load for testing and trouble shooting, e.g.  by one of our infrared cameras.

Elma EVSE-200 can also simulate faults, lige missing PE, CP-PE short etc. to test functions in the charger like auto reset.

The adapter is ready to use in nylon carry bag, including type 2 plug, simple turn-knob setting for PP (Load request) and CP (connection status) for ventilated (ABD) and un-ventilatet (ABC) chargers. The adapter is universal and can be used with any installation testers or any other electrical tester. Metrel A 1532