Teracom TSS8030R - smoke detector

Teracom TSS8030R - smoke detector

€42.84 VAT included.
€35.70 VAT excluded. Best price guarantee.
Available for backorder.
MPN: TSS8030R

TSS8030R is a smoke detector, designed for early warning of a fire condition. It responds to fixed threshold smoke concentration detected in the protected rooms. The principle of functioning of the detector is based on infrared rays distraction caused by smoke particles entering the optic chamber. The smoke sensitivity is factory preset.

Reviews (0)

No reviews

Short specification
Manufacturer	Teracom Systems
Ordering code	TSS8030R

The fire detector is controlled by a microprocessor, operating on the basis of improved algorithm for self-compensation of the chamber contamination. The smoke sensor has a relay output and can be used with controllers which have digital inputs in “dry contact” mode.

Features

Smoke sensitivity complies with EN 54-7:2000+ A1:2002;
Digital signal processing;
Very low current consumption;
IP30 ingress protection;
Excellent long-term stability;
LED indicators for status information.

Applications

Server rooms and data centers smoke detection;
Fire conditions notification;
Building Management System (BMS);
Mobile operator facilities smoke detection monitoring.

Compatible controllers

Ethernet IO module TCW241
Ethernet data logger TCW220
Remote IO module TCW122B-CM
GSM-GPRS remote monitoring controller TCG120
Ethernet digital IO module TCW181B-CM
IP watchdog monitoring module TCW122B-WD
Remote environmental monitoring module TCW112-CM
IP watchdog relay board TCW112-WD

TSS8030R-UMEN	Download (16) - Manuál EN (Stránka výrobcu)

15 other products in the same category:

Teracom TSM400-4-CPTH - temperature, humidity and CO2 sensor (Modbus RTU)

Teracom TSM400-4-CPTH - temperature, humidity and CO2 sensor (Modbus RTU) 2

Teracom sensors

Teracom TSM400-4-CPTH - temperature, humidity and CO2...

Teracom Systems

CO2 (Carbon dioxide) is a colourless and odourless gas. It is the fourth most present gas in the Earth’s atmosphere. Its concentration, especially indoors, is important for the health and efficiency of the people in them. TSM400-4-CPTH is a multi-sensor that supports MODBUS RTU protocol over the RS-485 interface. The sensor measures CO2 concentration,...

View Product

Teracom SPL2-RJ11 - RJ11 splitter

Electricity

Teracom SPL2-RJ11 - RJ11 splitter

Teracom Systems

RJ11 splitter

View Product

Teracom TST300 - MODBUS precision digital temperature sensor

Teracom TST300 - MODBUS precision digital temperature sensor 2

Teracom sensors

Teracom TST300 - MODBUS precision digital temperature sensor

Teracom Systems

TST300 is a precision temperature sensor with MODBUS RTU interface. The device doesn’t need an external power supply, it is powered through the interface. It is an excellent solution for precision temperature monitoring and control. The temperature sensor integrates a band-gap temperature sensor element plus signals processing and provides a fully...

View Product

Teracom TST103 - singlewire digital temperature sensor

Teracom TST103 - singlewire digital temperature sensor 2

Teracom sensors

Teracom TST103 - singlewire digital temperature sensor

Teracom Systems

TST103 is a digital temperature sensor with a 1-Wire interface. It is an excellent solution for temperature monitoring and control. It focuses on applications that require precise temperature monitoring – server rooms, offices, drug and food stores, etc. It is also suitable for smart office applications, as well as for data loggers and thermostats. A...

View Product

TSH202B - 1-Wire...

TSH202B - 1-Wire... 2

Teracom sensors

TSH202B - 1-Wire temperature and humidity sensor

Teracom Systems

TSH202 is a 1-Wire humidity and temperature sensor. It provides a low-cost option for humidity and temperature monitoring. The sensor communicates over a 1-Wire bus. Each sensor has a unique 64-bit serial code, which allows multiple sensors to be connected on the same 1-Wire bus. The sensor communicates over a 1-Wire bus. Each sensor has a unique 64-bit...

View Product

Teracom TSM400-4-TH - temperature and humidity sensor with MODBUS RTU (RS-485 interface)

Teracom TSM400-4-TH - temperature and humidity sensor with MODBUS RTU (RS-485 interface) 2

Online only

Teracom sensors

Teracom TSM400-4-TH - temperature and humidity sensor...

Teracom Systems

TSM400-4-TH is a digital humidity and temperature sensor that supports MODBUS RTU protocol over the RS-485 interface. Its construction is suitable for wall mounting, making it a preferred choice for monitoring of server rooms, data centers, offices, stores etc. The digital temperature and humidity sensor integrates basic elements as well as signals...

View Product

Teracom TSP200 - 1-wire barometric pressure transmitter

Teracom TSP200 - 1-wire barometric pressure transmitter 2

Teracom sensors

Teracom TSP200 - 1-wire barometric pressure transmitter

Teracom Systems

TSP200 is a 1-Wire barometric pressure sensor. The basic silicon MEMS element is based on proven piezo-resistive pressure sensor technology. It has high EMC robustness, high accuracy and linearity and long-term stability. A mixed-signal application-specific integrated circuit (ASIC) performs A/D conversions and provides the conversion results. The...

View Product

Teracom TSM400-4-CPTH - temperature, humidity and CO2 sensor (Modbus RTU)

Teracom TSM400-4-CPTH - temperature, humidity and CO2 sensor (Modbus RTU) 2

Teracom sensors

Teracom TSM400-4-CP - pressure and CO2 sensor (Modbus RTU)

Teracom Systems

CO2 (Carbon dioxide) is a colourless and odourless gas. It is the fourth most present gas in the Earth’s atmosphere. Its concentration, especially indoors, is important for the health and efficiency of the people in them. TSM400-4-CPTH is a multi-sensor that supports MODBUS RTU protocol over the RS-485 interface. The sensor measures CO2 concentration and...

View Product

Teracom TSH300 - MODBUS precision digital temperature and humidity sensor

Teracom TSH300 - MODBUS precision digital temperature and humidity sensor 2

Teracom sensors

Teracom TSH300 - MODBUS precision digital temperature and...

Teracom Systems

TSH300 is an RS-485 humidity and temperature sensor. The device doesn’t need external power supply. It is powered through the interface. The sensor is an excellent solution for humidity and temperature measuring. The humidity and temperature sensor integrates basic elements as well as signals processing and provides a fully calibrated digital output. This...

View Product

Teracom TSH330 - IP54 temperature and humidity sensor

Teracom TSH330 - IP54 temperature and humidity sensor 2

Teracom sensors

Teracom TSH330 - IP54 temperature and humidity sensor

Teracom Systems

TSH330 is an IP54 temperature and humidity sensor with an RS-485 interface. It supports the Modbus RTU protocol. A unique capacitive element is used for measuring relative humidity while the temperature is measured by a bandgap element. Both elements are seamlessly coupled to a 12-bit analog to digital converter, which results in superior measurement...

View Product

Teracom TSC200 - 1-wire current transmitter

Teracom TSC200 - 1-wire current transmitter 2

Teracom sensors

Teracom TSC200 - 1-wire current transmitter

Teracom Systems

TSC200-15 is a galvanic isolated 1-Wire current sensor. The sensor provides a low-cost option for AC or DC current monitoring. The 1-Wire sensor is based on fully integrated Hall-effect current sensor IC. It provides high accuracy and galvanic isolation. Embedded signal processing guarantees calibrated digital output.

View Product

Teracom RMK - DIN rail mount kit

Teracom sensors

Teracom RMK - DIN rail mount kit

Teracom Systems

Teracom rack mount kit for mounting sensors or modules to DIN rails.

View Product

Teracom RMK - DIN rail mount kit

Teracom RMK - DIN rail mount kit 2

In stock

Teracom sensors

Teracom TC Monitor-10 - monitoring software for 10 sensors

Teracom Systems

TC Monitor is remote monitoring software that collects data and controls your TCG (GSM) and TCW (Ethernet) IO modules. The application is easy to install and allows you to set up a monitoring system for a few minutes. The supported devices can operate in server or client mode, making it possible to add controllers installed in different locations.The...

View Product

Teracom TSM400-1-TH - Singlewire temperature and humidity sensor

Teracom TSM400-1-TH - Singlewire temperature and humidity sensor 2

Teracom sensors

Teracom TSM400-1-TH - Singlewire temperature and humidity...

Teracom Systems

TSM400-1-TH is a digital temperature and humidity sensor with a 1-Wire interface. Its construction is designed for wall mounting, making it suitable for monitoring of server rooms, data centers, offices, stores etc.The digital temperature and humidity sensor integrates basic elements as well as signals processing and provides a fully calibrated digital...

View Product

Teracom TST100 - 1-Wire temperature sensor

Teracom TST100 - 1-Wire temperature sensor 2

Teracom sensors

Teracom TST100 - 1-Wire temperature sensor

Teracom Systems

TST100 is a 1-Wire temperature sensor. The sensors can be used outdoor because of its IP protection. The temperature sensor integrates a band-gap temperature sensor element as well as signals processing for a fully calibrated digital output. Used digital signal processing allows accuracy as low as ±0.5°C. Each sensor has a unique 64-bit serial code, as a...

View Product

Need help?

Do you need help with choosing the right product for your needs? Contact us on elso@elso.sk.

Quick links

Elso

Product added to compare.

Webové stránky spoločnosti Elso Philips Service používajú súbory cookies na svoju správnu funkciu a pre zabezpečenie lepších služieb pre Vás.