Fluke Biomedical 232D - Electrical Safety Analyzer

This product has been discontinued.

The 232D Electrical Safety Analyzer is a versatile, full-featured manual tester that combines both safety testing and ECG simulation in one portable package.
The test receptacle on the top panel simulates the standard single-fault conditions to assist technicians in assessing equipment safety. An internal GFCI protects both the operator and the equipment under test.
The 232D’s robust features simplify analysis of sophisticated equipment, such as 12-lead electrocardiographs or recorders. The device features a wide range of ECG simulations and performance testing waveforms, as well as 10 jacks for patient applied parts testing. The 232D conducts leakage current tests on all or individual patient electrodes and between specified patient electrode pairs.

Reviews (0)

No reviews

Short specification
Manufacturer	Fluke Biomedical
Ordering code	-

ECG-performance testing
12-lead ECG simulation and patient applied parts testing
GFCI protection
115 V and 15 A operation
Easy-to-use
Portable
Rugged design

232D Electrical Safety Analyzer

Specifications

Display

	Autoranging 3.5 digit, red LED
	Overrange indicated by a flashing "1999" reading

Ambient Temperature

Operating:	15 °C to 35 °C (59 °F to 95 °F)
Storage:	0 °C to 50 °C (32 F° to 122 °F)

LED Indicators

	Resistance current source active
	Test receptacle GFCI tripped
	ECG-performance tests active

Input Jacks

Meter inputs:

4.2 mm/0.166"-diameter banana jacks

Electrical-Safety Tests

Resistance

	Test lead (one Kelvin cable required)
	Point-to-point environmental test (two Kelvin cables required)
Accuracy:	± (2 % of reading +2 counts)
Range:	0 mΩ to 5000 mΩ

Leakage Current

	Case leakage current (with external cable)
	Case leakage current (via power cord ground conductor)
	All ECG leads (single leads RL, RA, LA, LL & V1-V6, interleads RA-RL, LA-RL, and LA-RA and patient lead isolation; all leads @ line voltage / 1 mA)
Accuracy:	± (5 % of reading + 1 uA) @ DC and from 48 Hz to 100 kHz

Load Current

Range:	Current draw by device 0.1 A to 15 A
Accuracy:	± 5% of range

True RMS Voltage

	Measurement of L1-G, L2-G, and L1-L2 (line voltage)
	Voltage gradient (mV)
	0 mV to 199.9 mV (autoranging)
	0 mV to 1999 mV (autoranging)
	0 V to 199.9 V
Accuracy:	± (2 % of reading + 2 counts) to 100 Hz

Test-Load Impedance

	ANSI/AAMI ES1-1993 (revision of the earlier ANSI/AAMI ES1-1985 and SCL-12/78)
	1000 Ω ± 1 % @ DC

ECG Jacks

Ten AHA color-coded universal binding posts, compatible with 3.2 mm and 4.0 mm pins and disposable snap electrodes

Power Requirements

	Available only in 115-V, @ 15 A, 50 / 60 Hz
	Detachable hospital-grade power cord (supplied)
	Internal instrument power usage of < 100 mA

Test Receptacle

	Standard U.S. 115-V/15-A, hospital grade ONLY
	Front panel switches for selecting power ON/OFF to the equipment under test, normal/reverse polarity, open/closed ground, open/closed neutral

ECG-Performance Testing (Lead I)

Square Wave:	2 Hz, 1 mV bipolar
DC Pulse:	4 seconds, +1 mV
Sine Waves:	10 Hz, 40 Hz, 60 Hz, 100 Hz, 1 mV p-p
Triangle Wave:	2 Hz, 3 mV p-p
ECG normal sinus rhythm:	30 BPM, 60 BPM, 120 BPM, 180 BPM and 240 BPM (± 0.5 %), 1 mV