Meracie šnúry, krokodíly a svorky Pico Dolphin clips (red) TA006 pico Technology The crocodile clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to the TA000 test lead. The toothed grip offers good contact on fine wire, with a 30 mm jaw opening limit. Zobraziť
Príslušenstvo ku osciloskopom Pico Mixmaster 12-Channel Automotive Signal Mixer PP361 pico Technology With the Mixmaster 12-channel automotive signal mixer you can view an ignition parade display of up to 12 cylinders on any lab scope. Mixmaster can produce a parade display of up to 12 cylinders using a single channel of your lab scope. If you have a 2-channel scope, then Mixmaster can also display 2 engine banks separately with up to 6 cylinders per bank. Zobraziť
Konektory a redukcie Pico BNC plug to 4 mm plugs (1.8 m) MI029 pico Technology The BNC to 4 mm adapter connects two 4 mm (“banana”) plugs to a BNC socket. Zobraziť
Príslušenstvo ku osciloskopom Fluke PM9082 - Banánková dvojzástrčka na BNC samca Fluke 916163 Redukcia BNC na 4 mm banánik Zobraziť
Príslušenstvo ku osciloskopom Fluke SCC290 Software and Carrying Case kit Fluke 3894826 Software FlukeView a kufrík pre Scopemeter 190-II. Zobraziť
Konektory a redukcie Fluke TAS90 - Sada banánikových adaptérov Fluke 614187 Set contains 30 V CAT II rated: Four 4mm adapters for banana plug (1 red, 1 gray, 2 black) Four Backprobe pins for banana plug, 1 A (1 red, 1 gray, 2 black) Zobraziť
Príslušenstvo ku osciloskopom Pico 15V Power supply for the TA046 differential probe... pico Technology Zobraziť
Elso Súprava 4 káblov (TA125 - TA128) pico Technology TA125KIT BNC káble na pripojenie 4 mm banánik a príslušenstva k osciloskopu Zobraziť
Konektory a redukcie Pico BNC plug to 4 mm adapter MI078 pico Technology The BNC to 4 mm adapter connects two 4 mm (“banana”) plugs to a BNC socket. If you have a sensor such as a current clamp with 4 mm plug outputs, for example, this adapter allows you to plug it into a Pico PC Oscilloscope with a BNC input. Zobraziť
Na sklade Príslušenstvo ku osciloskopom Pico PP697 - IEPE akcelerometer (TA095) pico Technology PP697 Jednoosý akcelerometer na použitie s IEPE (ICP) osciloskopmi na meranie vibrácií. Zobraziť
Príslušenstvo ku osciloskopom Pico Mixmaster secondary ignition pickups (pack of 4) PP339 pico Technology Secondary Ignition Pickups A pack of 4 secondary ignition pickups is available for use with Mixmaster. Each lead is approximately 40 cm / 15 in long. These leads do not include an earth clip. If required, the longer PP178 Secondary Ignition Pickup can also be used. Zobraziť
Príslušenstvo ku osciloskopom Pico 25 MHz, 1400 V Differential oscilloscope probe... pico Technology The TA057 is a CAT III rated differential oscilloscope probe that can measure up to ±1400 volts. Zobraziť
Príslušenstvo ku osciloskopom Pico 100 MHz, 700 V Differential oscilloscope probe... pico Technology The TA042, TA043 and TA044 are active differential oscilloscope probes. They let you use a conventional earthed oscilloscope to measure signals that are not referenced to ground, including mains voltages. Aktívna diferenciálna sonda. Zobraziť
Príslušenstvo ku osciloskopom Pico 1.5 GHz passive SMA oscilloscope probe TA061 pico Technology These very high-bandwidth 1.5 GHz probes are suitable for use with high-speed oscilloscopes and spectrum analyzers. Applications include digital communications and RF design. The TA061 has an SMA connector, making it ideal for use with PicoScope 9000 Sampling Oscilloscopes / Digital Signal Analyzers, while the TA062 has a BNC connector. Zobraziť