Viac
    Ceny v:
    Registrácia
    Domov / Ostatné / Ukončená výroba / Fluke Bm. IDA-4 Plus/2 - Overenie spôsobilosti infúznych púmp a dávkovačov

    Fluke Bm. IDA-4 Plus/2 - Overenie spôsobilosti infúznych púmp a dávkovačov

    Značka: Fluke Biomedical

    Prístroj IDA-4 je nahradený novým modelom IDA.

    Dostupnosť Opýtajte sa
    Možnosti doručenia
    Kód: 1333
    €1 €0,83 bez DPH
    Fluke Bm. IDA-4 Plus/2 - Overenie spôsobilosti infúznych púmp a dávkovačov
    Značka: Fluke Biomedical
    Fluke Bm. IDA-4 Plus/2 - Overenie spôsobilosti infúznych púmp a dávkovačov
    Ukončená výroba
    Doprava zadarmo pre každý nákup nad 80€ s DPH vytvorený cez náš eshop s doručením na Slovensko.
    Doprava zadarmo
    pre každý nákup nad 80€ s DPH vytvorený cez náš eshop s doručením na Slovensko.
    Široké možnosti platby na dobierku, kartou online alebo bankovým prevodom.
    Široké možnosti
    platby a doručenia pre vaše pohodlie. Prijímame platobné karty, Google Pay alebo Apple Pay.
    Tovar skladom odosielame v deň objednávky (do 13:00)
    Tovar skladom
    odosielame v deň objednávky kuriérom SPS alebo službou Packeta (objednávky do 13:00).
    Záručný, pozáručný servis teplomerov, multimetrov a iného metrologického vybavenia.
    Servis a kalibrácia
    teplomerov, multimetrov a iného metrologického vybavenia vrátane záručného a pozáručného servisu.
    • Tests up to four infusion pumps simultaneously
    • Compatible with virtually any type of infusion device
    • Instantaneous and average flow measurement
    • Occlusion pressure measurements to 45 psi
    • Single- and dual-flow (piggyback) testing
    • Full PCA testing (bolus volume, lockout time, and automated external triggering)
    • Autostart mode enables unit to begin testing only when fluid is detected
    • On-board graphing of pressure and flow
    • Built-in memory to save test results for printing or downloading to computer
    • Hydrograph graphical software to control unit and display results via PC
    • Automated testing through Fluke Biomedical medTester 5000C (US only)
    Biomedical Test   >   Performance Analyzers   >   Infusion Device   >  
    IDA 4 Plus Multi-Channel Infusion Device Analyzer
    Specifications
    Average Flow Rate Technique
      Calculated by measuring a volume over time
    Range
      0.5 ml/hr to 1000 ml/hr
    Accuracy
      1% of reading + 1 LSD for flows of 16-200 ml/hr for volumes over 20 ml; otherwise, 2% of reading + 1 LSD after delivery of 10 ml
    Volume Measurements Technique
      Volume measured directly by the transducer in minimum sample sizes of 60 microliters
    Range
      0.06 ml to 9999 ml
    Accuracy
      1% of reading + 1 LSD for flows of 16 to 200 ml/hr for volumes over 20 ml; otherwise, 2% of reading ± 1 LSD after delivery of 10 ml
    Minimum Bolus Volume
      0.5 ml
    Maximum Bolus Count
      99
    PCA Measurements Technique
      Volume is measured directly by the transducer in minimum bolus volumes of 0.5 ml. The measurement is made with a continuous rate between 0 and 30 ml/hr. The bolus flow rate should be at least four times the basal flow rate for reliable detection of boluses.
    Maximum Bolus Volume
      9999 ml
    Accuracy
      See volume measurement
    Pressure Measurements Technique
      Direct occlusion of the infusion line and measurement of pressure prior to the glass transducer.
    Range
      0 PSI to 45 PSI and equivalents in mmHg and kPa
    Accuracy
      1% of full scale + 1 LSD
    Back Pressure
      - 100 mmHg to + 300 mmHg
    Supply Voltage
      Autoswitching to any voltage from 90 V ac to 260 V ac
    Dimensions (LxWxH)
      30.2 cm x 22.9 cm x 18.1 cm
      (11.8 in x 9 in x 7.2 in)
    Weight
      4.9 kg (10.8 lb)

    Buďte prvý, kto napíše príspevok k tejto položke.

    Nevypĺňajte toto pole: