Viac
    Registrácia
    Domov / Ostatné / Ukončená výroba / Fluke Bm. QA-ES - tester elektrochirurgických prístrojov

    Fluke Bm. QA-ES - tester elektrochirurgických prístrojov

    Značka: Fluke Biomedical

    QA-ES Series II analyzes electrosurgical units quickly and accurately. A wide load-resistance range provides 128 user-selectable loads, including very low loads for testing many of today’s ESUs.
    An accuracy of ± 2 % of reading down to 20 mA guarantees reliable high-frequency leakage results. With capability to run an automatic power- distribution test in as little as 1 minute, the QA-ES works fast so technicians save time.
    An Ansur QA-ES software plug-in allows users to create and automatically run tests, capture data, and produce easy-to-read reports with a PC.

    Dostupnosť Opýtajte sa
    Možnosti doručenia
    Kód: 1328
    €1 €0,83 bez DPH
    Fluke Bm. QA-ES - tester elektrochirurgických prístrojov
    Značka: Fluke Biomedical
    Fluke Bm. QA-ES - tester elektrochirurgických prístrojov
    Ukončená výroba
    Doprava zadarmo pre každý nákup nad 80€ s DPH vytvorený cez náš eshop s doručením na Slovensko.
    Doprava zadarmo
    pre každý nákup nad 80€ s DPH vytvorený cez náš eshop s doručením na Slovensko.
    Široké možnosti platby na dobierku, kartou online alebo bankovým prevodom.
    Široké možnosti
    platby a doručenia pre vaše pohodlie. Prijímame platobné karty, Google Pay alebo Apple Pay.
    Tovar skladom odosielame v deň objednávky (do 13:00)
    Tovar skladom
    odosielame v deň objednávky kuriérom SPS alebo službou Packeta (objednávky do 13:00).
    Záručný, pozáručný servis teplomerov, multimetrov a iného metrologického vybavenia.
    Servis a kalibrácia
    teplomerov, multimetrov a iného metrologického vybavenia vrátane záručného a pozáručného servisu.
    • Automatic power distribution measurement, including power, current, peak-to-peak voltage closed load only), and crest factor
    • Oscilloscope output
    • High-frequency leakage measurements with accuracy of ± 2 % of reading
    • 128 internal user-selectable test loads from 10 Ω to 5200 Ω
    • Foot-switch output for triggering the ESU under test
    • Ansur QA-ES software plug-in for automated test protocols
    • Large display
    • RS-232 and Centronic-printer interface
    Biomedical Test   >   Performance Analyzers   >   Electrosurgery   >  
    QA-ES Electrosurgery Analyzer
    Technical Specifications
    Generator Output
    Continuous Operation: Continuous measurement of power, current, peak-to-peak voltage (closed load only), and crest factor
    Single Operation: Single measurement after the set delay time of the ESU output of power, current, peak-to-peak voltage (closed load only), and crest factor
    Power Distribution: Automatic measurement of power, current, peak-to-peak voltage (closed load only), and crest factor through a user-selectable load range
    RF Leakage current: Provides connections and load configurations to measure HF leakage from both grounded and isolated equipment
    RECQM: Test the “return electrode control quality monitoring” using the QA-ES internal loads
    Modes of Operation
      Manual or remote controlled (via Ansur)
    Measurement
      True RMS value of applied waveform
    RMS Bandwidth
    Instrumentation Only: 30 Hz to 10 MHz (-3 dB)
    With loads: 30 Hz to 2.5 MHz (-3 dB)
    Low Frequency Filter
      100 Hz filter to avoid low-frequency disturbance or interference
    Current
      20 mA to 2200 mA
    Current Accuracy
      20 mA to 2200 mA ± 2 % of reading
    Load Resistance
      10 Ω to 2500 Ω in step of 25 Ω (@ dc), 2500 Ω to 5200 Ω in step of 100 Ω (@ dc)
    Additional Fixed Load
      200 Ω 400 W for 30 s; max 15 % duty cycle
    Crest Factor
      The higher of the two peak voltage measurements is used for computation
    Range
      1.4 to 16 (V peak/V RMS)
    Foot-Switch Output
      The foot switch output can be used to trigger the electrosurgical unit
    Peak-to-Peak Voltage
    0 kV to 10 kV (closed load only) accuracy: ± 10 %
    Note: Measurement is taken between the active and dispersive electrodes with closed load only.
    Oscilloscope Output
      5 V/A uncalibrated, 100 mA RF current minimum input
    Ansur QA-ES Plug-In Remote Control
      All functions and tests in QA-ES may be performed from the PC.
    User-Programmable Test Sequences
      Allows unlimited numbers of test sequences with user-programmable templates and test limits. These tests include power distribution test, output test, HF leakage, and RECQM verification.
    Storage and Recall
      Protocol formats and data may be stored, recalled, printed out, or transferred.
    Temperature
    Operating: 15 ºC to 35 ºC (59 ºF to 95 ºF)
    Storage: 0 ºC to 50 ºC (32 ºF to 122 ºF)
    Display
      LCD graphic display
    Alphanumeric Format
      8 lines x 40 characters
    Graphic Mode
      240 x 64 pixel matrix
    Display Control
      5 F-keys, enter, cancel, control knob, and an encoder
    Data Input/Outputs
      Parallel printer port and bidirectional RS232
    Power
      115/230 VAC; 48 to 66 Hz, 35 VA
    Housing
      Metal case
    Dimensions (WxDxH):
      34.2 cm x 39.5 cm x 13.2 cm (13.5 in x 15.6 in x 5.2 in )
    Weight
      9.8 kg (21.6 lb)

    Buďte prvý, kto napíše príspevok k tejto položke.

    Nevypĺňajte toto pole: